Deckvest 6D
Offshore Lifejacket Harness
Fully featured, lightweight, front opening lifejacket harness with automatic inflation and optional harness release system.
from €367,70 inc. VAT
Images
• One Size
• UML Pro Sensor Elite activation system
• Improved front opening buckle with smooth body adjuster system
• Enhanced shoulder fit system for the perfect fit – every time – all day
• Enhanced back profile for clean, unobtrusive look and fit
• Hard-wearing coated fabrics in key areas
• New sprayhood design with large clear structured visor – stored away from neck
• Firing system on rear of bladder for improved comfort and reduced snagging when inflated
• 40mm Single Leg Strap with stowage pocket - extra wide, easy to find, easy to locate
• Pylon 360° lifejacket light fitted
• Lume-On bladder illumination lights fitted
• MOB1 AIS Compatible
• 5 Year warranty on product registration
• Emergency safety line cutter accessory available
• Optional Harness Release System (HRS)
• Activation handle located behind soft loop, easy to locate, grab and pull
• Soft loop attachment released and open
• User separated from safety line and boat
• Easily reset to use again
• ISO12402-1 Deck Safety Harness
The Spinlock Harness Release System (HRS) is a new innovation which enables the wearer to disconnect from the safety line by releasing a lever behind the soft loop safety line attachment point of the lifejacket harness.
What is HRS?
Spinlock still considers a knife to be an essential piece of carried equipment. However, we have yet to develop a reliable consistent safety line clip release system. Instead, we are focused on developing a release system of the actual lifejacket harness. Testing showed that the harness release system needed to be simple to understand, simple to use and simple to maintain as well as reliable over the lifetime of the lifejacket. At the same time, the harness release system must meet the requirements of the ISO12402 approval.
Staying connected to the boat is undoubtedly safer than being in the water and use of a safety line is actively encouraged. However, in the event of a fall overboard, a casualty can find themselves being dragged/trapped alongside or behind the vessel. A situation which can be hard to be released from.
The Deckvest 6D is approved to the following international standards:
CE Approved
ISO12402-3 170N Lifejacket
ISO12402-2 275N Lifejacket
ISO12401 Deck Harness
Sprayhood ISO 12402-8
Requires 1 x 33g CO2 cylinder
The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator late in 2018 (13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator).
This is a water sensitive activation system, that uses a compressed paper capsule which dissolves when wet, which then releases a spring to puncture the CO2 cylinder.
The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation.
The Pro Sensor ELITE has two indicators that show the status of the CO2 cylinder and firing head.
• Access to latest online support and advice
• Updates on MOB prevention and advice
Choose your Deckvest 6D
- Bladder Size
-
- Colour
-
- HRS™ Fitted?
-
DW-LJH6D/ATW
Deckvest 6D 170N Tropic White
✓ Available
DW-LJH6D/A/HRS
Deckvest 6D 170N Black with Fitted HRS system
✓ Available
DW-LJH6D/A275/MR
Deckvest 6D 275N Mercury Red
✓ Available
DW-LJH6D/A275/MR/HRS
Deckvest 6D 275N Red with Fitted HRS system
✓ Available
DW-LJH6D/ACY
Deckvest 6D 170N Citrus Yellow
✓ Available
DW-LJH6D/AMR
Deckvest 6D 170N Mercury Red
✓ Available
DW-LJH6D/APB
Deckvest 6D 170N Pacific Blue
✓ Available
DW-LJH6D/ATW/HRS
Deckvest 6D 170N Tropic White with Fitted HRS system
✓ Available
DW-LJH6D/A
Deckvest 6D 170N Black
✓ Available
DW-LJH6D/A275/HRS
Deckvest 6D 275N Black with Fitted HRS system
✓ Available
DW-LJH6D/AMR/HRS
Deckvest 6D 170N Red with Fitted HRS system
✓ Available
DW-LJH6D/APB/HRS
Deckvest 6D 170N Pacific Blue with Fitted HRS system
✓ Available
DW-LJH6D/A275
Deckvest 6D 275N Black
✓ Available
DW-LJH6D/ACY/HRS
Deckvest 6D 170N Citrus Yellow with Fitted HRS system
✓ Available
Accessories
-
Safety Line Cutter
DW-CTR
Only compatible with DW-LJH6D/A, DW-LJH6D/A275, DW-LJH6D/A275/MR, DW-LJH6D/ACY, DW-LJH6D/AMR, DW-LJH6D/APB et DW-LJH6D/ATW
-
Ocean Signal MOB1 Unit
DW-MOB/1
Compatible with any Deckvest 6D
-
ELITE Manual Conversion Cap
DW-MAK/E
Compatible with any Deckvest 6D
-
Belt Pack
DW-PCB
Compatible with any Deckvest 6D
-
Side Pack
DW-PCS
Compatible with any Deckvest 6D
-
2 Clip Elasticated Performance Safety Line
DW-STR/02E/C
Compatible with any Deckvest 6D
-
3 Clip Elasticated Performance Safety Line
DW-STR/03/C
Compatible with any Deckvest 6D
-
2 Clip & 1 Link Elasticated Performance Safety Line
DW-STR/3L/C
Compatible with any Deckvest 6D
-
Chest Pack
DW-PCC
Compatible with any Deckvest 6D
-
1 Clip & 1 Link Performance Safety Line (1 metre length)
DW-STR/1L/C
Compatible with any Deckvest 6D
-
1 Clip & 1 Link Elasticated Performance Safety Line
DW-STR/2LE/C
Compatible with any Deckvest 6D
Spare Parts
-
33g CO2 Cylinder
DW-CYD33
Only compatible with DW-LJH6D/A, DW-LJH6D/A/HRS, DW-LJH6D/ACY, DW-LJH6D/ACY/HRS, DW-LJH6D/AMR, DW-LJH6D/AMR/HRS, DW-LJH6D/APB, DW-LJH6D/APB/HRS, DW-LJH6D/ATW et DW-LJH6D/ATW/HRS
-
60g CO2 Cylinder
DW-CYD60
Only compatible with DW-LJH6D/A275, DW-LJH6D/A275/HRS, DW-LJH6D/A275/MR et DW-LJH6D/A275/MR/HRS
-
Deckvest Mesh Bag
DW-LJH/BAG
Compatible with any Deckvest 6D
-
Lume-On Bladder Light x 2
DW-LMN
Compatible with any Deckvest 6D
-
Pylon Lifejacket Light
DW-PY/L1
Compatible with any Deckvest 6D
-
ELITE Lifejacket Re-arming Kit (33g cylinder)
DW-RAK/E170
Only compatible with DW-LJH6D/A, DW-LJH6D/A/HRS, DW-LJH6D/ACY, DW-LJH6D/ACY/HRS, DW-LJH6D/AMR, DW-LJH6D/AMR/HRS, DW-LJH6D/APB, DW-LJH6D/APB/HRS, DW-LJH6D/ATW et DW-LJH6D/ATW/HRS
-
ELITE Lifejacket Re-arming Kit (60g cylinder)
DW-RAK/E275
Only compatible with DW-LJH6D/A275, DW-LJH6D/A275/HRS, DW-LJH6D/A275/MR et DW-LJH6D/A275/MR/HRS
-
ELITE Firing Cap
DW-UMLE
Compatible with any Deckvest 6D