Spinlock
Händlersuche
Search icon
Händlersuche
Basket
Germany
Australia Commercial UK Commercial USA France Germany Italy Netherlands New Zealand Spain United Kingdom United States

About Us

Competition: Terms and Conditions

Clipper Round the World Yacht Race social media competition to win a Spinlock ‘bag of swag’ including Deckvest LITE+, Safety Line (DW-STR/2LE/C), Kneepads and Deckpack

One winner will be selected at random from all entries.

Competition closes Wednesday 6th November at midnight GMT.

The prizes are as stated, are not transferable and no cash or other alternatives will be offered. 

The competition is open worldwide. Worldwide delivery will be arranged directly with the winner.

Prizes are subject to availability and the prize suppliers' standard terms and conditions.

The promoters reserve the right to amend or alter the terms of competitions at any time and reject entries from entrants not entering into the spirit of the competition.

Reasonable efforts will be made to contact the winner. If the winner cannot be contacted or are unable to comply with these terms and conditions, the Promoter reserves the right to offer the prize to the next eligible entrant.

The lucky winner will be selected after the closing date and will be contacted in due course. If within 3 months the winner does not reply, another winner will be selected.

No purchase necessary.

By entering the competition, entrants agree to be bound by the rules and by any other requirements set out in the promotional material.

The name of the winner can be obtained by sending a stamped, self-addressed envelope to Spinlock Ltd, 41 Birmingham Road, Cowes, Isle of Wight, PO31 7BH.

The decision is final.

Cost of shipping is included in the prize; it will be shipped to the address provided by the winner. 

Any re-delivery requirements where a user has not been available to receive their delivery that requires an additional cost is the winner’s responsibility. The winners are responsible for all expenses not expressly stated in these terms and conditions as being included as part of the prize.
The Promoter accepts no responsibility for failure to receive an entry where such failure is due to circumstances outside the Promoter’s control.

If there is any reason to believe that there has been a breach of these terms and conditions, or of the spirit of this promotion, the Promoter may at its sole discretion refuse to accept an entry.

The Promoter’s decision is binding in all matters relating to this promotion, and no correspondence shall be entered into.

To the extent permitted by law, the Promoter accepts no liability for any damage, loss or injury suffered due to entering this promotion or taking up a prize. By entering this promotion entrants will be deemed to have accepted, and will be bound by, these terms and conditions.


The Deckvest 6D and Deckvest Vito both offer the ultimate performance lifejacket with a few key differences to suit your requirements.  

Website slide   6d vs vito




Deckvest 6D

  • Optimised for cruising and offshore
  • UML Pro Sensor Elite inflator – activated once in contact with the water, the more well-known inflation system offering simplicity for rearming and good performance from offshore to inshore.
  • Front opening with unique quick fasten buckle with smooth body adjuster
  • Four colours (Blue, Grey, Yellow and White)


Website slide   6d vs vito v2




Deckvest Vito

  • Optimised for performance cruising and racing
  • Hammar inflator – activated once a certain water pressure is reached. A more performance inflation system designed to resist accidental inflation within the tough offshore racing environment.
  • Side entry with course and fine tune adjustment for a full custom fit
  • One colour (Black)


Deckvest VITO and Deckvest 6D common features


  • Sprayhood fitted
  • LUME-ON lights fitted
  • PYLON light fitted
  • HRS – Harness release system compatible
  • One Size fits all
  • 170N and 275N Available
  • MOB1 AIS compatible
  • Cutter attachment point
  • Toggle attachment points for chest pack
  • 40mm single crotch strap




Find our interactive map of dealers and service centres worldwide here:

https://www.spinlock.co.uk/de/dealers

Spinlock products (the Products) are designed for use in the leisure marine environment on dinghies, yachts, powerboats and water sports craft (the Intended Use). The Products have not been designed, manufactured or tested for any other uses as they are not intended for such uses. In particular, the Products are not designed, or intended for use, for human suspension, unless specifically stated for that product, or for the suspension of loads that would be a health and safety risk. Users should refer to Spinlock's published materials (available via www.spinlock.co.uk) for further information in relation to the use of the Products.

If the Products are used for a purpose other than the Intended Use, this is done entirely at the user's own risk and, to the extent permitted by law, Spinlock accepts no liability in relation to such use.

Any modification made to a Product is deemed to be at the user's own risk and the user is responsible for ensuring it is suitable and fit for the purpose intended. To the extent permitted by law, Spinlock accepts no liability in relation to such modifications.

Spinlock Partners

Spinlock are the Official Lifejacket Supplier for the 2019-20 and 2021-22 Clipper Race, who are using a custom Deckvest VITO Lifejacket Harness, Performance Safety Lines and Accessories

Spinlock are the Official Technical Supplier of Personal Protective Equipment to INEOS Team UK, in support of the team in their goal to win the America’s Cup for Great Britain.

The RYA is the UK national body for dinghy, yacht and motor racing and cruising, RIBs and sports boats, windsurfing and personal watercraft and a leading representative for inland waterways cruising. Spinlock offer access to supported and discounted products to a variety of Instructor and Membership groups.

The 1851 Trust is an innovative education charity which excites young people about science, tech and engineering through sailing. Spinlock are an active supporter, helping kids on the water and in the education program.

UKSA is a Cowes based watersports academy and charity who believe in the power of the sea to make a positive change. Providing transformational water-based experiences and education, Spinlock ensure UKSA have access to the latest and best equipment.

The Ellen MacArthur Cancer Trust is a national charity that rebuilds confidence after cancer, using sailing to support, empower and inspire young people between the ages of 8-24 in embracing their future with optimism.

Spinlock is committed to reducing our impact on the environment in all areas of our business. Our long-term commitment is to continue to raise awareness and promote sustainability among our team members, suppliers, customers, and communities.

Recent examples of our commitment include a packaging review to ensure we choose packaging that can reduce our environmental impact. 

After reviewing many packaging materials, all of which have an environmental impact, our product header cards are made from Polypropylene. Whilst a plastic, Polypropylene can be collected with your roadside recycling, which means the header will be recycled and reused easily, without confusion.

We have stopped using plastic bags for as much of our packaging as possible.

For large trade sales to single users we offer the products ‘free of packaging’ which massively reduces the use of packaging materials.

At our Head Office and Production facility, totalling 60 staff, new recycling points have been added for simple recycling of personal waste and consumables.

Here are some ways in which you can make a difference with your environmental impact by disposing of your Spinlock products safely:

Weee symbol

Electrical Waste

Check your electrical goods for the crossed-out wheelie bin symbol to see if your item can be disposed of within-household waste. All electrical goods with the symbol from the Waste Electrical and Electronic Equipment (WEEE) Directive can be disposed of at a WEEE collection point for recycling. To find your nearest WEEE collection point visit www.recycle-more.co.uk.

Batteries

Users can return their WEEE products to Spinlock for recycling. Batteries should never be put in the general household waste or recycling bins as part of the Waste Batteries & Accumulators Regulations.
Our WEEE Producer Registration number is WEE/BX4116YB
Our Batteries Producer Registration Number (BPRN) is: BPRN02812

Environment                 

Spinlock Limited is committed to being environmentally aware, actively support programs that reduce our company’s environmental impact and continually improve our environmental performance as an integral part of our business strategy and operating procedures. 

•  Strive to continually improve its environmental performance and prevent pollution
•  Promote good environmental practice both within the company and externally to its suppliers, customers and other stakeholders
•  Exceed, or as a minimum comply with, its obligations with regard to environmental regulations and laws
•  Minimise the environmental impact of its products by appropriate design, selection of materials and provision of information
•  Maintain contact with external organisations concerned with environmental matters
•  Encourage its staff to participate in environmental initiatives both within the workplace and outside
•  Recognise we have a responsibility to the environment to meet or exceed legislative and regulatory requirements
•  Ensure that this policy and all procedures relating to it are understood, implemented and maintained by all company employees

Resources

Spinlock Limited will endeavour to conduct its business to reflect the best environmental practice in order to control and reduce our direct impacts on the environment. We will:

•  Reduce the amount of rubbish we send to a landfill;
•  Increase the amount of rubbish we recycle; and
•  Purchase from sustainable sources or recycled products when available
•  Ask our suppliers what their policies are and request a copy of the policy when approaching new suppliers. All suppliers receive our Supplier Guide annually (electronically) and main and/or critical suppliers are audited by ourselves annually
•  We will recycle all cardboard either through collection service or reused for packaging
•  We will reuse envelopes and packaging where possible
•  We will recycle all glass (staff kitchen waste) and magazines through collection service
•  We will donate all unused Mobile Telephones to charity
•  We will sell on any unused equipment
•  We will recycle or reuse any scrap materials where possible

Activate your Sail-Sense performance features by following the link below:

https://sail-sense.spinlock.co.uk/user-web-portal/index.html#/login


Document Size Category  
Rig-Sense | App Instructions 585 KB Instructions Download
Rig-Sense | Conversion Chart 294 KB Instructions Download
Rig-Sense | Instructions 872 KB Instructions Download
Rig-Sense | Tuning your Rig 861 KB Instructions Download
Sail-Sense | Product instructions 545 KB Instructions Download

Filter by product:

You can now purchase Spinlock Gift vouchers here (UK only). 

Gift vouchers are the perfect way to treat someone special and let them choose the product, colour, size and style they’d love. Vouchers are available in staggered pricing for any budget. They are valid for a year after purchase, and are easy to redeem

These are one-time use vouchers - the balance is not stored. Vouchers can be applied to any Spinlock product*

You will receive an automatic email confirmation from www.spinlock.co.uk, we will email you additionally with the printable e-voucher. To redeem email orders@spinlock.co.uk.

*Any Spinlock product, not including digital products, apps or subscriptions. Further Terms and conditions may apply, please email prosupport@spinlock.co.uk for more information. 

PRIVACY POLICY STATEMENT

Privacy Notice

We take your privacy very seriously. This privacy notice will inform you as to how we look after your personal data when you visit our website www.spinlock.co.uk (“our Website”) (regardless of where you visit from), when you use any Spinlock Sense App or any other App made available by us, and when you correspond with us by telephone, email or otherwise. It tells you about your privacy rights and how the law protects you.

IMPORTANT INFORMATION AND WHO WE ARE

Purpose of this privacy notice

This privacy notice aims to give you information on how Spinlock Limited collects and processes your personal data through the use of our Website, including any data you may provide through our Website when you make an online enquiry or sign up for our promotional emails, when you use any Spinlock Sense App or any other App made available by us, and when you correspond with us by telephone, email or otherwise.

Our Website is not intended for children and we do not knowingly collect data relating to children. 

It is important that you read this privacy notice together with any other privacy notice we may provide on specific occasions when we are collecting or processing personal data about you so that you are fully aware of how and why we are using your data. This privacy notice supplements the other notices and is not intended to override them. 

Who we are

Spinlock Limited (“we”, “us”, “our”) is a ‘data controller’ for the purposes of your personal data. This means that we determine the purpose and means of the processing of your personal data. You will find our contact details at the end of this privacy notice (see below: “How to contact us”).

PERSONAL DATA WE COLLECT ABOUT YOU

Personal data is any information relating to an identified or identifiable individual. 

We collect, use, store and transfer different kinds of personal data about you. This may include: 

  • Full name;
  • Job title;
  • Business name;
  • Name of your employer or the organisation you represent;
  • Address;
  • Email address;
  • Unique identification number;
  • Telephone numbers (mobile and landline);
  • Geo location data, if you have a Spinlock Sense product and you have opted to switch on the location services setting in the App and/or on your device (location data may or may not be personal data, depending on the circumstances);
  • Technical information from when you visit our Website, including your login data, browser type and version, time zone setting and location, browser plug-in types and versions, operating system and platform and other technology on the devices you use to access our Website;
  • Information about how you use our Website;
  • Your billing and transaction information;
  • Profile information, including purchases or orders made by you;
  • Your personal or professional interests;
  • Marketing and communications information, including your preferences in receiving marketing from us and our third parties and your communication preferences; and
  • Information that you volunteer to us when you make an online enquiry and when you correspond with us by telephone, email or otherwise.

We also collect, use and share aggregated data, such as sail usage data from our Sail-Sense product for any purpose. Aggregated data may be derived from your personal data but is not considered personal data in law as this data does not directly or indirectly reveal your identity. However if we combine or connect aggregated data with your personal data so that it can directly or indirectly identify you, we treat the combined data as personal data which will be used in accordance with this privacy notice.

If you do not provide personal data

For individual business customers or suppliers, where we need to collect personal data to enter into a contract with you and you fail to provide that data when requested, we may not be able to enter the contract with you. This data may include your name, address and email address. For individual customers, if you thereafter do not provide the personal data we ask for which may include further contact details, this may delay or prevent us from providing our products or services to you. 

HOW YOUR PERSONAL DATA IS COLLECTED

Depending on the circumstances, we use different methods to collect personal data from and about you including:

  • Directly from you. You may give us your personal data by filling in forms on our Website or by corresponding with us by email, telephone or otherwise. This includes personal data you provide when you:
  • complete an online enquiry form;
  • subscribe to our promotional emails; or
  • use any Spinlock Sense App or any other App made available by us. 
  • Other sources. We may receive personal data about you from various sources as set out below:
  • Contact, financial and transaction data from providers of technical and payment and delivery services;
  • From an employee or representative of the organisation for whom you work;
  • Via third party subscribers of the Spinlock Sense App or any other App made available by us (location data only; any location data collected may or may not be personal data, depending on the circumstances); and
  • Via our IT systems e.g. door entry systems and reception logs, automated monitoring of our Website and other technical systems (such as our computer networks and connections), CCTV and access control systems, communication systems and email.

HOW AND WHY WE USE YOUR PERSONAL DATA

Under data protection law, we can only use your personal data if we have a proper reason for doing so, for example:

  • to comply with our legal and regulatory obligations;
  • for the performance of our contract with you or to take steps at your request before entering into a contract;
  • for our legitimate interests or those of a third party; or
  • where you have given consent.

A legitimate interest is when we or a third party have a business or commercial reason to use your information, so long as this is not overridden by your own rights and interests.

The table below explains what we use your personal data for and our lawful basis for doing so.

What we use your personal data for Our lawful basis for processing data  
For individual customers with whom we have contracts – to provide our products and services to you  

Necessary for the performance of our contract with you or to take steps at your request before entering into a contract with you.

 

Necessary for our legitimate interests or those of a third party e.g. to the extent to which personal data is collected via any Spinlock Sense App or any other App made available by us, to be able to achieve our commercial objectives and assist our customers in achieving their commercial objectives

 
For other individuals who work for or represent corporate business customers (or prospective corporate business customers) e.g. for corresponding with you about the products and services we offer, to provide a price quote, to respond to your queries and to manage the contract with the organisation you work for or represent   Necessary for our legitimate interests or those of a third party e.g. to deal with pre-contractual enquiries or issues and to manage the contract with the organisation you work for or represent and to the extent to which personal data is collected via any Spinlock Sense App or any other App made available by us, to be able to achieve our commercial objectives and assist our customers in achieving their commercial objectives
For individual suppliers with whom we have contracts e.g. for corresponding with you about the products or services you offer, to obtain a price quote and to take steps under the contract with you   Necessary for the performance of our contract with you or to take steps at your request before entering into a contract with you
For individuals who work for or represent our corporate suppliers (or prospective corporate suppliers) e.g. for corresponding with you about the products or services your organisation offers, to obtain a price quote and to manage the contract with the organisation you work for or represent   Necessary for our legitimate interests or those of a third party e.g. to deal with pre-contractual enquiries or issues and to manage the contract with the organisation you work for or represent
To manage our relationship with you, or the organisation which you work for or represent, which will include (where appropriate) notifying you about changes to our terms of business or privacy notice or dealing with complaints  

Necessary to comply with our legal obligations

 

Necessary for our legitimate interests i.e. to manage our relationship with you or the organisation you work for or represent, and to analyse and improve the products or services we offer

 
To prevent and detect fraud against you or us Necessary for our legitimate interests or those of a third party i.e. to minimise fraud that could be damaging for us and for you    
Other processing necessary to comply with legal and regulatory obligations that apply to our business or as otherwise permitted or required by law   Necessary to comply with our legal obligations
Gathering and providing information required by or relating to audits, enquiries or investigations by regulatory bodies   Necessary to comply with our legal obligations
Ensuring business policies are adhered to e.g. policies covering data security  

Necessary to comply with our legal obligations

 

Necessary for our legitimate interests or those of a third party e.g. to make sure we are following our own internal procedures so we can deliver the best service to you or the organisation you work for or represent

 
Operational reasons, such as improving efficiency, training and quality control   Necessary for our legitimate interests or those of a third party e.g. to be as efficient as we can so we can deliver the best service for you or the organisation you work for or represent, at the best price  
Ensuring the confidentiality of commercially sensitive information

Necessary to comply with our legal obligations

 

Necessary for our legitimate interests or those of a third party i.e. to protect commercially valuable information

 
Statistical analysis to help us manage our business e.g. in relation to our financial performance, customer base, product range or other efficiency measures   Necessary for our legitimate interests or those of a third party e.g. to be as efficient as we can so we can deliver the best service for you or the organisation you work for or represent, at the best price
Preventing unauthorised access and modifications to systems

Necessary to comply with our legal obligations

 

Necessary for our legitimate interests or those of a third party e.g. to prevent and detect criminal activity that could be damaging for us and for you or the organisation you work for or represent

 
Updating and maintaining customer and supplier records

Necessary to comply with our legal obligations

 

Necessary for our legitimate interests or those of a third party e.g. to make sure we can keep in touch with our customers and other contacts

 
Staff management and administration Necessary for our legitimate interests or those of a third party e.g. to make sure we are following our own internal procedures and working efficiently so we can deliver the best service we are able to  
External audits for the audit of our accounts   Necessary to comply with our legal obligations
To make suggestions and recommendations to you about products or services that may be of interest to you or the organisation you work for or represent   Necessary for our legitimate interests e.g. to develop our products/services and grow our business  
To enforce or apply our Website and/or App terms and conditions or any other agreements   Necessary for our legitimate interests or those of a third party e.g. to enforce our legal rights and protect our business
To administer and protect our business and our Website (including troubleshooting, data analysis, testing, system maintenance, support, reporting and hosting of data)  

Necessary for our legitimate interests e.g. for running our business, provision of administration and IT services, network security and to prevent fraud

 

Necessary to comply with our legal obligations

To deliver relevant website content to you and measure or understand the effectiveness of the content   Necessary for our legitimate interests e.g. to study how customers use our products/services, to develop them, to grow our business and to inform our marketing strategy
To use data analytics to improve our Website, products/services, marketing, customer relationships and experiences   Necessary for our legitimate interests e.g. to define types of customers for our products and services, to keep our Website updated and relevant, to develop our business and inform our marketing strategy
For testimonials on our Website With your consent  

 

Where we rely on consent as a lawful basis to process your personal data, you have the right to withdraw your consent at any time. To do this, please telephone, email or write to us (see below: “How to contact us”).

 

Please note that we may process your personal data without your knowledge or consent where this is required or permitted by law. 

Marketing communications

We may use your personal data to send you periodic communications by email, post and text about our products and services.

We have a legitimate interest in processing your personal data for marketing purposes. This means we do not usually need your consent to send you information about our products and services. However, where consent is needed, we will ask for this consent separately and clearly.

You have the right to opt out of receiving marketing communications at any time by:

  • emailing info@spinlock.co.uk;
  • writing to us at 41 Birmingham Road, Cowes, Isle of Wight, PO31 7BH (for the attention of the Operations Director); or
  • using the ‘unsubscribe’ link in our emails or ‘STOP’ number in texts. 

We may ask you to confirm or update your marketing preferences if there are changes in the law, regulation, or the structure of our business. 

Third party marketing

We will get your express opt-in consent before we share your personal data with any other company for marketing purposes. 

Cookies

We may obtain information about your general usage of our Website by using a cookie which is stored on your browser or the hard drive of your computer, although we do not use cookies to identify individuals. Usage information helps us to improve our Website and to deliver a better and more personalised service. Some of the cookies we use are essential for our Website to operate. 

You can block cookies by activating the setting on your browser which allows you to refuse the setting of all or some cookies. You can also indicate your preference to our Website to control its use of cookies. However, if you block cookies you may not be able to use all the features of our Website. For further information about our use of cookies, please refer to our cookies policy which you will find on our Website.

WHO DO WE SHARE YOUR PERSONAL DATA WITH

Depending on the circumstances, we may share your personal data with:

  • External service providers we use to help run our business e.g. website hosting provider, email service provider, marketing service provider, IT providers, document management providers, banks, payment card providers and postal service providers;
  • Professional advisers including lawyers, bankers, loss adjusters, insurers, auditors, technical consultants and experts; and
  • Advertisers and advertising networks to send you marketing communications.

If you are the owner of a Spinlock Sense product, and you transfer your device to a new owner, then on a written request from the new owner (and on production of suitable proof of ownership) we may transfer data which is accessible through the associated App to the new owner. This data may include personal data. 

We only allow our service providers to handle your personal data if we are satisfied they take appropriate measures to protect your personal data. We also impose contractual obligations on service providers to ensure they can only use your personal data to provide services to us. 

We may disclose and exchange information with law enforcement agencies and regulatory bodies to comply with our legal obligations. 

We may also need to share some personal data with other parties, such as potential buyers of some or all of our business or during a re-structuring. Usually, information will be anonymised but this may not always be possible. 


TRANSFERRING YOUR PERSONAL DATA OUTSIDE OF THE EUROPEAN ECONOMIC AREA 

Some of organisations with whom we share your personal data are based outside the European Economic Area (EEA) (which comprises the countries in the European Union and Iceland, Liechtenstein and Norway) so their processing of your personal data will involve a transfer outside of the EEA.

These transfers are subject to special rules under European and UK data protection law.

Whenever we transfer your personal data outside of the EEA, we ensure a similar degree of protection is afforded to your data by ensuring one of the following (or one of the other grounds set out in data protection law) applies:

  • your data is transferred to countries that have been deemed to provide an adequate level of protection for personal data by the European Commission;
  • the transfer is necessary for the performance of a contract between you and us;
  • the transfer is necessary to establish, exercise or defend legal claims;
  • there are adequate safeguards in place between us and the organisation receiving it (e.g. by the use of European Commission approved contractual terms); or
  • you have provided explicit consent to the proposed transfer after being informed of any potential risks.

Please contact us (see below: “How to contact us”) if you want further information on the specific mechanism used by us when transferring your personal data outside of the EEA.

WHAT ARE YOUR RIGHTS IN RESPECT OF YOUR PERSONAL DATA? 

Data protection law gives you certain rights, which you can exercise free of charge. Your rights will differ depending on our lawful basis for processing your data:

Access The right to be provided with a copy of your personal data
Rectification The right to require us to correct any mistakes in your personal data
To be forgotten In certain situations, the right to require us to delete your personal data
Restriction of processing In certain situations, the right to require us to restrict processing of your personal data e.g. if you contest the accuracy of the data
Data portability In certain situations, the right to ask us to transfer any  personal data you provided to us to another organisation
To object The right to object at any time to your personal data being processed for direct marketing and in certain other situations to our continued processing of your personal data e.g. where processing is carried out for the purpose of our legitimate interests

 

We do not use personal data for automated decision making. For further information on each of those rights, including the circumstances in which they apply, please contact us or see the Guidance from the UK Information Commissioner’s Office (ICO) on individuals’ rights under the General Data Protection Regulation. [https://ico.org.uk/your-data-matters/]

If you would like to exercise any of those rights, please email or write to us (see below: “How to contact us”) and let us have enough information to identify you e.g. your full name and address and product or service reference as well as what right you want to exercise and the personal data to which your request relates.

HOW LONG DO WE KEEP YOUR PERSONAL DATA?

We will only retain your personal data for as long as necessary to fulfil the purposes we collected it for, including;

  • to respond to any questions, complaints or claims made by you or on your behalf;
  • to show that we treated you fairly;
  • to keep records of products registered by you; and
  • to keep records required by law to comply with our legal obligations.

We will not retain your data for longer than necessary for the purposes set out in this notice. Different retention periods apply for different types of personal data.

KEEPING YOUR PERSONAL DATA SECURE 

We have put in place reasonable and appropriate security measures to endeavour to prevent personal data from being accidentally lost, or used or accessed unlawfully. We limit access to your personal data to those who have a genuine business need to access it. Those processing your information will do so only in an authorised manner and are subject to a duty of confidentiality. 

Unfortunately, the transmission of information via the internet is not completely secure.  Although we will do our best to protect your personal data, we cannot guarantee the security of your data transmitted to our Website; any transmission is at your own risk.   

Our Website may include links to third-party websites, plug-ins and applications. Clicking on those links or enabling those connections may allow third parties to collect or share data about you.  We do not control these third-party websites and are not responsible for their privacy policies.  When you leave our Website, we encourage you to read the privacy notice of every website you visit.

We have procedures in place to deal with any suspected data security breach.  We will notify you and any applicable regulator of a suspected data security breach where we are legally required to do so. 

HOW TO COMPLAIN

We hope that we can resolve any query or concern you may raise about our use of your personal data.  If you want to complain about how we have used your personal data, please email or write to us (see below: “How to contact us”). However, if we are not able to resolve your complaint to your satisfaction, you can complain to the UK’s supervisory authority, the Information Commissioner’s Office (ICO). Further information about how to make a complaint to the ICO can be found on the ICO website www.ico.org.uk

The EU General Data Protection Regulation also gives you right to lodge a complaint with the supervisory authority in the European Union state where you work, normally live or where any alleged infringement of data protection laws occurred. 

CHANGES TO THE PRIVACY NOTICE

This version is Revision 1 last updated in July 2019

We may change this privacy notice from time to time and when we do so, we will inform you via our Website. If any changes are likely to have an adverse impact on your rights under data protection law, we will use reasonable endeavours to notify you of the changes in advance by email or by alternative means. 

CHANGES TO YOUR PERSONAL DATA

Please let us know if you change your name, address or any other personal detail (see below: “How to contact us”).

HOW TO CONTACT US
If you have any queries about this privacy notice or how we use your personal data, you can contact us by telephone or post as follows: 


Spinlock Limited 41 Birmingham Road, Cowes, PO31 7BH, UK

+44 1983 295555

info@spinlock.co.uk

Do you need extra help?

If you would like this notice in another format (for example large print) please contact us (see above: “How to contact us”).


Ceramic cam 0814 mr

Ceramic coatings on components within Spinlock rope holding devices are suited to hybrid rope coverings containing Vectran, Technora, Kevlar, or PBO.  The material properties of these fibres make them harder to grip, as they are effectively more “slippery”, which can compromise the load holding that can be achieved using the standard anodised surface finish.  To reach the max working load of the Spinlock jammer or clutch, with a hybrid covered rope, ceramic coated components which have a rougher surface texture providing better grip should be used.

The ceramic coating is more aggressive with the rope covering, but these exotic fibres are much more resistant to damage and therefore suitably matched for use with the ceramic coating.  The ceramic parts are not suitable for use with pure polyester covers which may be susceptible to damage at load limits.  Spinlock jammers or clutches built with hard-anodised jaws or cams are capable of achieving the max working loads when paired with 100% polyester covered ropes.  Both hard anodised and ceramic versions of components are made from the same raw components which then go through either the hard-anodising process or the ceramic coating process. 

The ceramic coating is also more resistant to wear and heat, making them ideal for high speed/high load lines, and they also grip the loaded line sooner when tension is transferred from the winch to the jammer or clutch.  This reduced ‘take up’ characteristic of the ceramic coating offers a significant benefit in performance. By minimising take up losses, the load left on the line after transfer is higher with ceramic components than with the anodised components. For the sailor who is seeking to find performance gains by upgrading sails, spars and to high tech ropes, upgrading rope holding equipment should be considered.

Although we do not market ceramic technology as having any increase in maximum load holding over the anodised, typically we do see an increase of 5 -20 %, depending on the rope being used.  Max load holding is very sensitive to different materials, diameters and rope manufacturers and Spinlock choose the MWL to represent an achievable level of performance across the spectrum ropes available on the market, rather than the absolute maximum level achieved in testing on the best performing rope.


Ceramic info page   body

Spinlock are proud to support a number of charities and organisations. The focus of our charitable support is in areas aligned to our business and our employees.

Involvement in the Community: In the areas where we are based, we encourage partnerships with local community organisations, schools and colleges to support numerous projects. Employees are encouraged to be involved in their local communities, through volunteering or fundraising and to make use of the company's payroll giving facility.

At Spinlock, we recognise that the benefits are mutual; employees are proud of helping to improve and support communities, which in turn helps them to develop their own skills and experience. We have employees who are local school Governors, board members for local nurseries, who help run local sporting clubs and who give talks and demonstrations for schools and local groups.

During 2011 we launched our Employee Charity Panel to encourage and support more staff to get involved with their community. Employees can apply for funding (monetary, product or time) to support any charity or community initiative they are personally involved with. These applications are reviewed by the Panel who meet half yearly to allocate funds to the charities who they think will benefit the most.


GCA Sailing has made Greig City Academy the first inner-city London school to have its own sailing club. 5 self-renovated craft and 1,000 sailors strong. The only London comprehensive school with its own fleet, students each year are taking on the challenge of sailing for the first time.

A maritime charity that teaches yachting, sailing and watersports courses to all levels and abilities from learning to sail to a career in yachting. UKSA offer practical solutions to help change young lives.

Ellen MacArthur Cancer Trust takes young people aged between 8 and 24 sailing to help them regain their confidence on their way to recovery from cancer, leukaemia and other serious illness.

People living with or affected by cancer on the Island can access professional and confidential counselling, befriending and complementary therapies at their Isle of Wight Cancer Support Centre. They offer some transportation options to help people attend hospital appointments, including the much relied upon Daisy Bus running from the ferry crossing to the mainland hospitals.

Ryde Rowing Club is one of the Isle of Wight's oldest sports clubs having been in continuous existence since 1877, providing facilities for competitive and recreational rowing as well as social facilities.

In 2018 the Spinlock team raised £5,006.02 taking on the Seafarers UK 24 Peak Challenge. Seafarers UK is a charity that has been helping people in the maritime community for over 100 years, by providing vital support to seafarers in need and their families.

Spinlock allows staff paid leave to donate blood. Giving blood saves lives. The blood you give is a lifeline in an emergency and for people who need long-term treatments. The service requires around 135,000 new donors a year to replace those who can no longer donate.

Spinlock sponsors the under eight-year old’s football team. The team play on the school football field on Saturday mornings. allowing children to have a fun, enjoyable introduction to football.

The Isle of Wight Christmas Toy appeal brightens Christmas for less fortunate children living on the Isle of Wight. These are children that for a variety of reasons are finding Christmas tough; perhaps a family bereavement or another crisis in their lives, maybe their family cannot afford gifts. Working with the IOW Council and local charities the Toy Appeal can ensure that the donations reach the children who need them most.

Sea Sanctuary is a unique mental health charity and one of the world’s leading exponents of blue health, the concept that ‘blue spaces’, such as the sea, are beneficial for people’s mental and emotional wellbeing. Spinlock donated enough for one person to participate in their Sail into Life programme.

Charity team

Need a helping hand? We may be able to help. If you are based locally to us and need some hands to make light work of your project then give us a shout.

We would like to support local charities and community organisations who would benefit from a few extra hands. We may be able to offer you up to 40 hours hard work to get a job done; such as marshalling, decorating or gardening. It may not be our day job but we’ll always do our best for you. If we can spare the hours depending on our schedule then we’ll be there. Email sustain@spinlock.co.uk with your requests. Please give as much detail as possible in order for your application to be accepted.


Declaration of Conformity

EU Declaration of Conformity - PPE Regulation (EU) 2016/425


Document Size  
Deckvest 6D - Declaration of conformity 197 KB Download
Document Size  
AERO PRO - Declaration of conformity 157 KB Download
Document Size  
ALTO - Declaration of conformity 159 KB Download
Document Size  
FOIL - Declaration of conformity 167 KB Download
Document Size  
Deckvest VITO - Declaration of conformity 187 KB Download
Document Size  
Deckvest LITE - Declaration of conformity 179 KB Download
Document Size  
Deckvest LITE PLUS - Declaration of conformity 186 KB Download
Document Size  
Deck Pro - Declaration of conformity 172 KB Download
Document Size  
Deckvest CENTO - Declaration of conformity 186 KB Download
Document Size  
Deckvest 5D 275 - Declaration of conformity 182 KB Download
Document Size  
Deckvest 5D 170 - Declaration of conformity 182 KB Download
Document Size  
DURO 170 - Declaration of conformity 178 KB Download
Document Size  
DURO 275 - Declaration of conformity 183 KB Download
Document Size  
DURO PLUS - Declaration of conformity 187 KB Download
Document Size  
DURO SOLAS - Declaration of conformity 231 KB Download
Document Size  
MAST PRO - Declaration of conformity 170 KB Download
Document Size  
SAFETY LINES - Declaration of conformity 184 KB Download
Document Size  
WING - Declaration of conformity 175 KB Download

Spinlock Terms and Conditions

Limited company

1. INTRODUCTION

Please read these terms and conditions carefully before using this Website operated by Spinlock Limited, a  limited company registered in England with Company Number: 943480 and VAT Number: GB226754257 having our registered office at 41 Birmingham Road Cowes Isle of Wight PO31 7BH England. By accessing or using our Website, you agree to be legally bound by these terms and conditions as they may be modified and posted on our Website from time to time. If you have any other queries on how to use this site, please phone 01983 295555 (Lines open Monday to Friday from 8:30 – 17:00). You can also email us with a brief outline of your problem.

Details of procedures, products, services, prices, payment and delivery are displayed on our Website. If you choose to place an order, you will be given clear instructions on how to navigate our simple online order process and you will be required to provide us with your accurate personal details.

Please:

1. Read through these terms and conditions carefully before using this Website.  Please note the exclusion or limitation of liability and the indemnity provisions in clauses 11 and 12 of these terms and conditions.

2. Print a copy for future reference.

3. Read our privacy policy section regarding your personal information.

If you have a comment, concern or complaint about a product or service you have purchased from us, please contact us via email at orders@spinlock.co.uk or by post at 41 Birmingham Road Cowes Isle of Wight PO31 7BH England.

2. GENERAL

We reserve the right to change any services, product prices, product specifications and availability at any time. All prices and descriptions supercede all previous publications. All product descriptions are approximate. Every effort is made to keep information regarding stock availability on the Website up to date. However, we do not guarantee that this is the case, or that stock will always be available.

If any provision of these terms and conditions is held by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of this Agreement and the remainder of the provision in question will not be affected.

This Website, any content contained herein and any use by you of this website and any contract  for goods or services made between you and us through this Website are governed by, and construed in, accordance with English law and you agree to submit to the exclusive jurisdiction of the courts of England. All contracts are concluded in English. These terms and conditions do not affect your statutory rights under applicable law.

3. DEFINITIONS

‘Conditions’ means these terms and conditions.

‘We/us/our’ means Spinlock Limited

‘Website’ means the Website located at www.spinlock.co.uk or any subsequent URL which may replace it or sit alongside it.

‘United Kingdom’ means England, Wales, Scotland, Northern Ireland and the Channel Islands.

‘You/your’ means a user of the Website.

‘Working days’ means Monday to Friday (excluding public holidays in the United Kingdom).

4. ORDER PROCESS

To be eligible to purchase goods or services on this Website and lawfully enter into and form contracts on this Website, you must:

• if an individual, be 18 years of age or over

• register your real name, address, phone number, email address and any other details requested.

If you are under 18, please ask an adult to contract on your behalf. By offering to purchase goods and services, you represent to us that you are 18 years of age or over and authorise us to transmit information (included updated information) to obtain information from third parties, including, but not limited to, your debit or credit card numbers or credit reports to authenticate your identity, to validate your credit card, to obtain an initial credit card authorisation and to authorise individual purchase transactions.

All orders are subject to acceptance and availability. If any goods ordered are not available, you will be notified by email and you will have the option either to wait until the item is available from stock or to cancel your order. It is your responsibility to provide us with a valid email address so that we can contact you if necessary. Any orders placed by you will be treated as an offer to purchase the goods or services from us and we have the right to reject such offers at any time prior to acceptance by us of your order.

You shall be responsible for ensuring the accuracy of the details provided on the order form and we will not accept an order unless all details requested on the order form have been entered correctly.

You acknowledge that any automated acknowledgment of your order that you may receive from us shall not amount to our acceptance of your offer to purchase goods or services advertised on the Website.

The conclusion of a contract between you and us will take place when we accept your order by (i) debiting your credit or debit card, or (ii) dispatching goods to you/making goods available for download by you or commencing the services, whichever is the earlier.

We will take all reasonable care, in so far as it is in our power to do so, to keep the details of your order and payment secure, but in the absence of negligence on our part we cannot be held liable for any loss you may suffer if a third party procures unauthorised access to any data you provide when accessing or ordering from the Website.

All contracts between us shall be deemed to incorporate these Conditions (and, where applicable, as varied by, or supplemented by, any additional terms and conditions referred to in the next paragraph).

Each item or service purchased is sold subject to additional specific terms and conditions relating to that item or service including, without limitation, terms and conditions concerning estimated delivery times and any warranties. Please ensure that you read such additional terms.

We are entitled to refuse any order placed by you and will not be required to provide an explanation.

5. DELIVERY

Goods will be delivered to you, the buyer, at the address provided by you on the order form.

We can deliver to an address other than the billing address, but please note that extra documentation may be needed to comply with such orders.

You will become the owner of goods you have ordered only when they have been paid for and delivered to you.

Risk in the goods will pass to you, the buyer, on delivery of the goods to you.

Any dates quoted for delivery of goods are approximate only and we shall not be liable for any delay in delivery of goods however caused. If, however, we are unable to deliver your goods by the date quoted for delivery (or in any event within 30 days of your order unless we have agreed  with you a later delivery date) , you shall be entitled to cancel the order at any time before delivery takes place.

6. PAYMENT

All prices are inclusive of VAT (where applicable) at the current rates and are correct at the time of entering the information onto the system. Prices quoted are for delivery (in the case of goods) and for performance (in the case of services) in the United Kingdom unless otherwise specified. Prices are in Pounds Sterling unless otherwise specified.

We reserve the right, by giving notice to you  at any time before delivery or performance to increase the price of goods or services to reflect any increase in the cost to us, which is due to any factor beyond our control (such as without limitation, any foreign exchange fluctuation, significant increase in the costs of labour, materials or other costs of manufacture).

In the unlikely event of there being such an increase in the price of goods or services you shall be entitled to cancel the order at any time before delivery or performance.

In the unlikely event that the price or description of an item or service has been incorrectly advertised, we will contact you by email, telephone or post to ask whether you wish to proceed with your order with the correct price or description. If you are not happy to proceed, or we are unable to obtain your instructions, we will cancel the order. Unless we have already despatched or commenced performance of your order, we will not be obliged to supply products or provide services at the incorrect price or based on an incorrect description.

Payment can be made by any major credit or debit card or through an electronic payment account as explained on the order form. However, we do not accept American Express cards. Payment will be debited and cleared from your account before the despatch of your goods or provision of the service to you.

By placing an order, you, consent to payment being charged to your debit/credit card account or electronic payment account as provided on the order form.

We will issue you with an electronic receipt to your email address once the goods have been despatched.

When you pay for your order by credit or debit card, we carry out checks or ‘authorisations’ with the card issuer for security reasons. Should any problems occur with the authorisation of your card, we will endeavour to contact you with further details.

All credit notes issued by us are only valid for the purchase or part purchase of merchandise from us. Credit notes are not exchangeable for cash or any other form of credit. This clause does not affect your statutory rights.

7. WARRANTY

We warrant to you that the goods to be free of defects in materials and workmanship for the Warranty Period (as defined below), subject to the remaining provisions of this clause 7 and to the other provisions of Conditions (including but not limited to the limitation and exclusion of liability provisions in clause 11 below). In the case of such a defect, we will either repair or replace the goods concerned but such obligation to repair or replace is the limit of our liability under this warranty.

The Warranty Period will be 5 years from date of purchase in respect of hardware and 2 years from date of purchase of deckware provided that in the case of the ‘Deckvest’ product the 2 year period can be extended to 5 years by registering the purchase of the ‘Deckvest ‘product on this website within 30 days of purchase. [Click here to register your Deckvest] These warranty periods are reduced to 1 year from date of purchase for any goods used (i) in  professional or semi-professional racing applications, (ii) for military purposes or (iii) outside of leisure sailing.

Determination of the suitability or fitness of the goods for the purpose contemplated by you in the purchase remains your sole responsibility and we do not give any warranty in connection with such suitability or fitness.

Spinlock shall not have liability under the warranty in this clause 7 for wear and tear, corrosion or ultra violet degradation  or if the goods:

  • are used for any application for which they were not  designed
  • are defective as a result of you failing to follow our oral or written instructions  as to the  installation, storage, commissioning and use of the goods
  • are incorrectly maintained or not maintained at all
  • are used in conditions that exceed the performance specification stated by us for those goods
  • are damaged as a result of wilful damage, by  accident, by negligence by you or a third party or due to use in abnormal conditions
  • are altered or modified in any way
  • are serviced by anyone other than an authorised Spinlock representative (unless such service meets our stated guidelines and standards for service of the goods concerned)

Any goods subject to a warranty claim must be returned to us for inspection unless we notify you to the contrary in writing.

We are not liable for any shipping or installation labour charge associated with any warranty claim.

The warranty in this clause 7 does not affect your statutory rights as a consumer.

You should note that certain environmental elements such as salt, sand, moisture and chemicals may considerably accelerate wear of certain goods. In exceptional circumstances wear or damage could occur on the first use of the goods which would reduce the lifetime of the goods to that single use.

8. RETURNS, CANCELLATIONS AND SUBSTITUTIONS

8.1.RETURNS

If you are not happy with the goods for any reason, within the period stated below, you can return it to us and we will refund you with the amount you paid for such goods.

All we ask is that you inform us in writing within 7 working days of the receipt of goods by you that you wish to return and then post the goods within 14 working days from the day after receipt. You may notify us in writing by sending an email to orders@spinlock.co.uk or a letter to 41 Birmingham Road Cowes Isle of Wight PO31 7BH UK.  We will send you a return code and return address label. Write the return code on the outside of the packaging and then return the goods to us at your expense in unused condition and in the original, undamaged packaging (or packaging of the same quality) for a full refund of the purchase price and (as may be applicable) shipping/ postage and packing costs which we charged you. We recommend you use an insured delivery service for returning goods to us.

Returns must be made within 14 working days of delivery.

You should allow up to 30 days from receipt by us of your returned goods for your refund to be processed. We will normally refund you using the same payment method that you used to purchase the goods.

This does not affect your statutory rights.

8.2. CANCELLATION

Please note that you are entitled to cancel any contract with us within 7 working days of receipt of the goods. If you do cancel a contract, then you must notify us in writing by sending an email to orders@spinlock.co.uk or a letter to 41 Birmingham Road Cowes Isle of Wight PO31 7BH UK.

You must return the goods to us in accordance with the procedure set out in clause 8.1 above.

8.3. DAMAGED OR FAULTY GOODS

We employ professional carriers. Nevertheless, you must examine goods on arrival and you must indicate on the professional carrier’s delivery note (when signing to accept delivery of the goods) if the external packaging is, or appears to be, damaged. We will refund the full purchase price including (as may be applicable) shipping/ postage and packing of an item which is delivered in a damaged or faulty condition or which develops a fault within 3 months from delivery (other than due to normal wear and tear, failure to follow instructions or misuse).

Alternatively, at your option, we will replace the item with the same or a similar product (subject to stock availability).

If a product is damaged or faulty, please notify us in writing (by email or post)  as soon as possible but in any event within 14 working days of receipt of the goods or of the fault developing (whichever is the later) and we will arrange a refund or replacement as you request.

You must return the goods to us in accordance with the procedure set out in clause 8.1 above  (although we may wish to arrange for the collection of the goods at our cost and will inform you accordingly when you notify us that you wish to return the goods due to them being damaged or faulty).

Sometimes the product specifications from the manufacturer may change, in which case, if you request a replacement, we will do our best to offer you a substitute of the same, or better, quality at the same price. If you are not happy with the replacement, you can return it in accordance with our returns policy as outlined above under clause 8.1.

Please allow 30 days from receipt by us of your item for your refund to be processed or replacement item despatched.

We reserve the right to refuse to issue a refund/replacement item and to recover the cost of the returns delivery from you in the event that the item is found to have suffered damage after delivery or has been misused or used other than in accordance with the instructions or if the problem is due to normal wear and tear.

This does not affect your statutory rights.

9. INTELLECTUAL PROPERTY

The content of the Website is protected by copyright, trade marks, database and other intellectual property rights and you acknowledge that the intellectual property rights in the material and content supplied as part of the Website shall remain with us or our licensors.

You may download or copy the content and other downloadable items displayed on the Website subject to the condition that the material may only be used for personal, non-commercial purposes. Copying or storing the contents of the Website for other than personal use is expressly prohibited.

You may retrieve and display the content of the Website on a computer screen, store such content in electronic form on disk (but not any server or other storage device connected to a network) or print one copy of such content for your own personal, non-commercial use provided you keep intact any copyright and proprietary notices. You may not otherwise reproduce, modify, copy, distribute or use for commercial purposes any of the materials or content on the Website.

You further acknowledge that any other use of the material and content of this Website is strictly prohibited and you agree not to (and agree not to assist or facilitate any third party to) copy, reproduce, transmit, publish, display, distribute, commercially exploit or create derivative works of such material and content.

No licence is granted to you in these Conditions to use any trade mark of www.spinlock.co.uk or its affiliated companies.

Goods and services sold by us may be subject to copyright, trade mark or other intellectual property rights in favour of third parties. We acknowledge those rights.

10. WEBSITE

We attempt to ensure that the information available on the Website at any time is accurate. However, we will not be held liable for any errors or omissions. We use all reasonable endeavours to correct errors and omissions as quickly as practicable after becoming aware or being notified of these.

Products, services, prices and offers are only valid at the time they are published on our Website. All images should be used only as a guide or representation of the item.

All drawings, descriptive matter and specifications of goods and services on the Website are for the sole purpose of giving an approximate description of the goods and services.

We may also change, suspend or discontinue any aspect of the Website, including the availability of any features, information, database or content and/or restrict access to parts or all of the Website without notice or liability.

We reserve the right to:

10.1. modify or withdraw, temporarily or permanently, this Website (or any part thereof) with or without notice to you and you confirm that we shall not be liable to you or any third party for any modification to, or withdrawal of, the Website

10.2. change the Conditions from time to time, and your continued use of the Website (or any part thereof) following such change shall be deemed to be your acceptance of such change. It is your responsibility to check regularly to determine whether the Conditions have been changed.

You may not use the Website for any of the following purposes:

10.3. disseminating any unlawful, harassing, libellous, abusive, threatening, harmful, vulgar, obscene, or otherwise objectionable material

10.4. transmitting material that encourages conduct that constitutes a criminal offence, results in civil liability or otherwise

10.5. breaches any relevant laws, regulations or code of practice

10.6. gaining unauthorised access to other computer systems

10.7. interfering with any other person’s use or enjoyment of the Website

10.8. breaching any laws concerning the use of public telecommunications networks

10.9. interfering or disrupting networks or websites connected to the Website

10.10. making, transmitting or storing electronic copies of materials protected by copyright without the permission of the owner

We reserve the right to refuse to post material on the Website or to remove material already posted on the Website.

11. LIABILITY AND INDEMNITY

Notwithstanding any other provision in the Conditions, nothing in these Conditions will affect or limit your statutory rights; nor exclude or limit our liability for death or personal injury resulting from our negligence nor exclude or limit our liability for fraud or fraudulent misrepresentation.

The Website is provided on an ‘as is’ and ‘as available’ basis without any representation or endorsement made and we make no warranties, whether express or implied, in relation to the Website, or any transaction that may be conducted on or through the Website including, but not limited to, implied warranties of non-infringement, compatibility, security, accuracy, condition or completeness, or any implied warranty arising from course of dealing or usage or trade custom.

You acknowledge that we cannot guarantee and cannot be responsible for the security or privacy of the Website and any information provided by you. You must bear the risk associated with the use of the Internet.

We will use reasonable endeavours to verify the accuracy of any information on the Website but make no representation or warranty of any kind, express or implied, statutory or otherwise, regarding the contents or availability of the Website or that it will be timely or error-free, that defects will be corrected, or that the Website or the server that makes it available are free of viruses or bugs. We will not be responsible or liable to you for any loss of content or material uploaded or transmitted through the Website and we accept no liability of any kind for any loss or damage from action taken in reliance on material or information contained on the Website.

We will use all reasonable endeavours to carry out our obligations within a reasonable period of time but will not be liable to you for any loss, costs or expenses arising directly or indirectly from any delays in doing so and we will not be deemed to be in breach of these Conditions by reason of any delay in performing, or any failure to perform, any of its obligations in relation to these Conditions, if the delay or failure was due to any cause beyond our reasonable control.

All warranties conditions or terms which may be implied by law or custom are expressly excluded from these Conditions or any contract between us to the fullest extent permitted by applicable law. Where the applicable law does not permit an implied warranty to be excluded, then such warranty shall, if permitted by such law, be limited to a period of one year.

We will not be liable, in contract or tort (including, without limitation, negligence), or breach of statutory duty or in respect of pre-contract or other representations (other than fraudulent misrepresentations) or otherwise for any of the following types of loss or damage suffered or incurred by you arising out of or in connection with the use of this Website or the sale or supply by us of goods or services to you:

a) loss of income or revenue

b) loss of  profits (whether direct or indirect)

c) loss of contracts, business or anticipated savings

d) loss of, or harm to, goodwill or reputation

e) any special, consequential or indirect losses  or damages not covered by the preceding paragraphs.

To the extent that our liability to you  is not excluded by the preceding paragraphs, our liability to you, in contract or tort (including, without limitation, negligence), or breach of statutory duty or in respect of pre-contract or other representations (other than fraudulent misrepresentations), or otherwise, for any loss or damage suffered or incurred by you arising out of, or in connection with, the use of this Website, or the sale or supply by us of goods or services to you will be limited to the purchase price of the goods or services to which such loss or damage relates or £1,000,000 (whichever is the greater).

You agree to fully indemnify, defend and hold us, and our officers, directors, employees and suppliers, harmless immediately on demand, from and against all claims, losses, costs and expenses, including reasonable legal fees, arising out of any breach of these Conditions by you, or any other liabilities, arising out of your use of this Website or any other person accessing the Website using your Personal Information with your authority.

This clause does not affect your statutory rights as a consumer, nor does it affect your contract cancellation rights.

12. FORCE MAJEURE

We shall have no liability for delays or failures in delivery or performance resulting from force majeure, including, but not limited to, war, demands or requests of Government authorities, strikes, shortages of labour, fuel, power, raw materials, late or defective performance or non-performance by suppliers, transportation disruptions, inability to ship or other causes beyond our reasonable control.

13. REGISTRATION

You warrant that:

13.1. the personal information which you are required to provide when you register is true, accurate, current and complete in all respects

13.2. you are not impersonating any other person or entity 

13.3. you will notify us immediately of any changes to your personal information by emailing or telephoning our customer service representatives

14. PRIVACY POLICY

In order to monitor and improve customer service, we sometimes record telephone calls.

You can find full details of our Privacy Policy on the Website.

15. THIRD PARTY RIGHTS

Except for our affiliates, directors, employees or representatives, a person who is not a party to these Conditions has no right under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of this agreement but this does not affect any right or remedy of a third party that exists or is available apart from that Act.

16. EXTERNAL LINKS

To provide increased value to our users, we may provide links to other websites or resources for you to access at your sole discretion. You acknowledge and agree that, as you have chosen to enter the linked website we are not responsible for the availability of such external sites or resources, and do not review or endorse and are not responsible or liable, directly or indirectly, for:

16.1. the privacy practices of such websites;

16.2. the content of such websites, including (without limitation) any advertising, content, products, goods or other materials or services on or available from such websites or resources; or

16.3. the use which others make of these websites or resources, nor for any damage, loss or offence caused, or alleged to be caused by, or in connection with, the use of, or reliance on, any such advertising, content, products, goods or other materials or services available on such external websites or resources.

17.OVERSEAS ORDERS

We can ship to customers outside of the United Kingdom subject to extra shipping or postage costs, as well as any additional taxes or expenses incurred due to complying with foreign regulatory requirements or laws. We will notify you of these extra costs and you will have an opportunity to cancel your order in case these costs are not satisfactory.

18.GOVERNING LAW AND JURISDICTION

The Website is controlled and operated in the United Kingdom.

The Conditions will be governed by the laws of England and Wales and you irrevocably agree to submit to the exclusive jurisdiction of the courts of England and Wales.

Spinlock Terms and Conditions

Limited company

1. INTRODUCTION

Please read these terms and conditions carefully before using this Website operated by Spinlock Limited, a  limited company registered in England with Company Number: 943480 and VAT Number: GB226754257 having our registered office at 41 Birmingham Road Cowes Isle of Wight PO31 7BH England. By accessing or using our Website, you agree to be legally bound by these terms and conditions as they may be modified and posted on our Website from time to time. If you have any other queries on how to use this site, please phone 01983 295555 (Lines open Monday to Friday from 8:30 – 17:00). You can also email us with a brief outline of your problem.

Details of procedures, products, services, prices, payment and delivery are displayed on our Website. If you choose to place an order, you will be given clear instructions on how to navigate our simple online order process and you will be required to provide us with your accurate personal details.

Please:

1. Read through these terms and conditions carefully before using this Website.  Please note the exclusion or limitation of liability and the indemnity provisions in clauses 11 and 12 of these terms and conditions.

2. Print a copy for future reference.

3. Read our privacy policy section regarding your personal information.

If you have a comment, concern or complaint about a product or service you have purchased from us, please contact us via email at orders@spinlock.co.uk or by post at 41 Birmingham Road Cowes Isle of Wight PO31 7BH England.

2. GENERAL

We reserve the right to change any services, product prices, product specifications and availability at any time. All prices and descriptions supercede all previous publications. All product descriptions are approximate. Every effort is made to keep information regarding stock availability on the Website up to date. However, we do not guarantee that this is the case, or that stock will always be available.

If any provision of these terms and conditions is held by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of this Agreement and the remainder of the provision in question will not be affected.

This Website, any content contained herein and any use by you of this website and any contract  for goods or services made between you and us through this Website are governed by, and construed in, accordance with English law and you agree to submit to the exclusive jurisdiction of the courts of England. All contracts are concluded in English. These terms and conditions do not affect your statutory rights under applicable law.

3. DEFINITIONS

‘Conditions’ means these terms and conditions.

‘We/us/our’ means Spinlock Limited

‘Website’ means the Website located at www.spinlock.co.uk or any subsequent URL which may replace it or sit alongside it.

‘United Kingdom’ means England, Wales, Scotland, Northern Ireland and the Channel Islands.

‘You/your’ means a user of the Website.

‘Working days’ means Monday to Friday (excluding public holidays in the United Kingdom).

4. ORDER PROCESS

To be eligible to purchase goods or services on this Website and lawfully enter into and form contracts on this Website, you must:

• if an individual, be 18 years of age or over

• register your real name, address, phone number, email address and any other details requested.

If you are under 18, please ask an adult to contract on your behalf. By offering to purchase goods and services, you represent to us that you are 18 years of age or over and authorise us to transmit information (included updated information) to obtain information from third parties, including, but not limited to, your debit or credit card numbers or credit reports to authenticate your identity, to validate your credit card, to obtain an initial credit card authorisation and to authorise individual purchase transactions.

All orders are subject to acceptance and availability. If any goods ordered are not available, you will be notified by email and you will have the option either to wait until the item is available from stock or to cancel your order. It is your responsibility to provide us with a valid email address so that we can contact you if necessary. Any orders placed by you will be treated as an offer to purchase the goods or services from us and we have the right to reject such offers at any time prior to acceptance by us of your order.

You shall be responsible for ensuring the accuracy of the details provided on the order form and we will not accept an order unless all details requested on the order form have been entered correctly.

You acknowledge that any automated acknowledgment of your order that you may receive from us shall not amount to our acceptance of your offer to purchase goods or services advertised on the Website.

The conclusion of a contract between you and us will take place when we accept your order by (i) debiting your credit or debit card, or (ii) dispatching goods to you/making goods available for download by you or commencing the services, whichever is the earlier.

We will take all reasonable care, in so far as it is in our power to do so, to keep the details of your order and payment secure, but in the absence of negligence on our part we cannot be held liable for any loss you may suffer if a third party procures unauthorised access to any data you provide when accessing or ordering from the Website.

All contracts between us shall be deemed to incorporate these Conditions (and, where applicable, as varied by, or supplemented by, any additional terms and conditions referred to in the next paragraph).

Each item or service purchased is sold subject to additional specific terms and conditions relating to that item or service including, without limitation, terms and conditions concerning estimated delivery times and any warranties. Please ensure that you read such additional terms.

We are entitled to refuse any order placed by you and will not be required to provide an explanation.

5. DELIVERY

Goods will be delivered to you, the buyer, at the address provided by you on the order form.

We can deliver to an address other than the billing address, but please note that extra documentation may be needed to comply with such orders.

You will become the owner of goods you have ordered only when they have been paid for and delivered to you.

Risk in the goods will pass to you, the buyer, on delivery of the goods to you.

Any dates quoted for delivery of goods are approximate only and we shall not be liable for any delay in delivery of goods however caused. If, however, we are unable to deliver your goods by the date quoted for delivery (or in any event within 30 days of your order unless we have agreed  with you a later delivery date) , you shall be entitled to cancel the order at any time before delivery takes place.

6. PAYMENT

All prices are inclusive of VAT (where applicable) at the current rates and are correct at the time of entering the information onto the system. Prices quoted are for delivery (in the case of goods) and for performance (in the case of services) in the United Kingdom unless otherwise specified. Prices are in Pounds Sterling unless otherwise specified.

We reserve the right, by giving notice to you  at any time before delivery or performance to increase the price of goods or services to reflect any increase in the cost to us, which is due to any factor beyond our control (such as without limitation, any foreign exchange fluctuation, significant increase in the costs of labour, materials or other costs of manufacture).

In the unlikely event of there being such an increase in the price of goods or services you shall be entitled to cancel the order at any time before delivery or performance.

In the unlikely event that the price or description of an item or service has been incorrectly advertised, we will contact you by email, telephone or post to ask whether you wish to proceed with your order with the correct price or description. If you are not happy to proceed, or we are unable to obtain your instructions, we will cancel the order. Unless we have already despatched or commenced performance of your order, we will not be obliged to supply products or provide services at the incorrect price or based on an incorrect description.

Payment can be made by any major credit or debit card or through an electronic payment account as explained on the order form. However, we do not accept American Express cards. Payment will be debited and cleared from your account before the despatch of your goods or provision of the service to you.

By placing an order, you, consent to payment being charged to your debit/credit card account or electronic payment account as provided on the order form.

We will issue you with an electronic receipt to your email address once the goods have been despatched.

When you pay for your order by credit or debit card, we carry out checks or ‘authorisations’ with the card issuer for security reasons. Should any problems occur with the authorisation of your card, we will endeavour to contact you with further details.

All credit notes issued by us are only valid for the purchase or part purchase of merchandise from us. Credit notes are not exchangeable for cash or any other form of credit. This clause does not affect your statutory rights.

7. WARRANTY

We warrant to you that the goods to be free of defects in materials and workmanship for the Warranty Period (as defined below), subject to the remaining provisions of this clause 7 and to the other provisions of Conditions (including but not limited to the limitation and exclusion of liability provisions in clause 11 below). In the case of such a defect, we will either repair or replace the goods concerned but such obligation to repair or replace is the limit of our liability under this warranty.

The Warranty Period will be 5 years from date of purchase in respect of hardware and 2 years from date of purchase of deckware provided that in the case of the ‘Deckvest’ product the 2 year period can be extended to 5 years by registering the purchase of the ‘Deckvest ‘product on this website within 30 days of purchase. [Click here to register your Deckvest] These warranty periods are reduced to 1 year from date of purchase for any goods used (i) in  professional or semi-professional racing applications, (ii) for military purposes or (iii) outside of leisure sailing.

Determination of the suitability or fitness of the goods for the purpose contemplated by you in the purchase remains your sole responsibility and we do not give any warranty in connection with such suitability or fitness.

Spinlock shall not have liability under the warranty in this clause 7 for wear and tear, corrosion or ultra violet degradation  or if the goods:

  • are used for any application for which they were not  designed
  • are defective as a result of you failing to follow our oral or written instructions  as to the  installation, storage, commissioning and use of the goods
  • are incorrectly maintained or not maintained at all
  • are used in conditions that exceed the performance specification stated by us for those goods
  • are damaged as a result of wilful damage, by  accident, by negligence by you or a third party or due to use in abnormal conditions
  • are altered or modified in any way
  • are serviced by anyone other than an authorised Spinlock representative (unless such service meets our stated guidelines and standards for service of the goods concerned)

Any goods subject to a warranty claim must be returned to us for inspection unless we notify you to the contrary in writing.

We are not liable for any shipping or installation labour charge associated with any warranty claim.

The warranty in this clause 7 does not affect your statutory rights as a consumer.

You should note that certain environmental elements such as salt, sand, moisture and chemicals may considerably accelerate wear of certain goods. In exceptional circumstances wear or damage could occur on the first use of the goods which would reduce the lifetime of the goods to that single use.

8. RETURNS, CANCELLATIONS AND SUBSTITUTIONS

8.1.RETURNS

If you are not happy with the goods for any reason, within the period stated below, you can return it to us and we will refund you with the amount you paid for such goods.

All we ask is that you inform us in writing within 7 working days of the receipt of goods by you that you wish to return and then post the goods within 14 working days from the day after receipt. You may notify us in writing by sending an email to orders@spinlock.co.uk or a letter to 41 Birmingham Road Cowes Isle of Wight PO31 7BH UK.  We will send you a return code and return address label. Write the return code on the outside of the packaging and then return the goods to us at your expense in unused condition and in the original, undamaged packaging (or packaging of the same quality) for a full refund of the purchase price and (as may be applicable) shipping/ postage and packing costs which we charged you. We recommend you use an insured delivery service for returning goods to us.

Returns must be made within 14 working days of delivery.

You should allow up to 30 days from receipt by us of your returned goods for your refund to be processed. We will normally refund you using the same payment method that you used to purchase the goods.

This does not affect your statutory rights.

8.2. CANCELLATION

Please note that you are entitled to cancel any contract with us within 7 working days of receipt of the goods. If you do cancel a contract, then you must notify us in writing by sending an email to orders@spinlock.co.uk or a letter to 41 Birmingham Road Cowes Isle of Wight PO31 7BH UK.

You must return the goods to us in accordance with the procedure set out in clause 8.1 above.

8.3. DAMAGED OR FAULTY GOODS

We employ professional carriers. Nevertheless, you must examine goods on arrival and you must indicate on the professional carrier’s delivery note (when signing to accept delivery of the goods) if the external packaging is, or appears to be, damaged. We will refund the full purchase price including (as may be applicable) shipping/ postage and packing of an item which is delivered in a damaged or faulty condition or which develops a fault within 3 months from delivery (other than due to normal wear and tear, failure to follow instructions or misuse).

Alternatively, at your option, we will replace the item with the same or a similar product (subject to stock availability).

If a product is damaged or faulty, please notify us in writing (by email or post)  as soon as possible but in any event within 14 working days of receipt of the goods or of the fault developing (whichever is the later) and we will arrange a refund or replacement as you request.

You must return the goods to us in accordance with the procedure set out in clause 8.1 above  (although we may wish to arrange for the collection of the goods at our cost and will inform you accordingly when you notify us that you wish to return the goods due to them being damaged or faulty).

Sometimes the product specifications from the manufacturer may change, in which case, if you request a replacement, we will do our best to offer you a substitute of the same, or better, quality at the same price. If you are not happy with the replacement, you can return it in accordance with our returns policy as outlined above under clause 8.1.

Please allow 30 days from receipt by us of your item for your refund to be processed or replacement item despatched.

We reserve the right to refuse to issue a refund/replacement item and to recover the cost of the returns delivery from you in the event that the item is found to have suffered damage after delivery or has been misused or used other than in accordance with the instructions or if the problem is due to normal wear and tear.

This does not affect your statutory rights.

9. INTELLECTUAL PROPERTY

The content of the Website is protected by copyright, trade marks, database and other intellectual property rights and you acknowledge that the intellectual property rights in the material and content supplied as part of the Website shall remain with us or our licensors.

You may download or copy the content and other downloadable items displayed on the Website subject to the condition that the material may only be used for personal, non-commercial purposes. Copying or storing the contents of the Website for other than personal use is expressly prohibited.

You may retrieve and display the content of the Website on a computer screen, store such content in electronic form on disk (but not any server or other storage device connected to a network) or print one copy of such content for your own personal, non-commercial use provided you keep intact any copyright and proprietary notices. You may not otherwise reproduce, modify, copy, distribute or use for commercial purposes any of the materials or content on the Website.

You further acknowledge that any other use of the material and content of this Website is strictly prohibited and you agree not to (and agree not to assist or facilitate any third party to) copy, reproduce, transmit, publish, display, distribute, commercially exploit or create derivative works of such material and content.

No licence is granted to you in these Conditions to use any trade mark of www.spinlock.co.uk or its affiliated companies.

Goods and services sold by us may be subject to copyright, trade mark or other intellectual property rights in favour of third parties. We acknowledge those rights.

10. WEBSITE

We attempt to ensure that the information available on the Website at any time is accurate. However, we will not be held liable for any errors or omissions. We use all reasonable endeavours to correct errors and omissions as quickly as practicable after becoming aware or being notified of these.

Products, services, prices and offers are only valid at the time they are published on our Website. All images should be used only as a guide or representation of the item.

All drawings, descriptive matter and specifications of goods and services on the Website are for the sole purpose of giving an approximate description of the goods and services.

We may also change, suspend or discontinue any aspect of the Website, including the availability of any features, information, database or content and/or restrict access to parts or all of the Website without notice or liability.

We reserve the right to:

10.1. modify or withdraw, temporarily or permanently, this Website (or any part thereof) with or without notice to you and you confirm that we shall not be liable to you or any third party for any modification to, or withdrawal of, the Website

10.2. change the Conditions from time to time, and your continued use of the Website (or any part thereof) following such change shall be deemed to be your acceptance of such change. It is your responsibility to check regularly to determine whether the Conditions have been changed.

You may not use the Website for any of the following purposes:

10.3. disseminating any unlawful, harassing, libellous, abusive, threatening, harmful, vulgar, obscene, or otherwise objectionable material

10.4. transmitting material that encourages conduct that constitutes a criminal offence, results in civil liability or otherwise

10.5. breaches any relevant laws, regulations or code of practice

10.6. gaining unauthorised access to other computer systems

10.7. interfering with any other person’s use or enjoyment of the Website

10.8. breaching any laws concerning the use of public telecommunications networks

10.9. interfering or disrupting networks or websites connected to the Website

10.10. making, transmitting or storing electronic copies of materials protected by copyright without the permission of the owner

We reserve the right to refuse to post material on the Website or to remove material already posted on the Website.

11. LIABILITY AND INDEMNITY

Notwithstanding any other provision in the Conditions, nothing in these Conditions will affect or limit your statutory rights; nor exclude or limit our liability for death or personal injury resulting from our negligence nor exclude or limit our liability for fraud or fraudulent misrepresentation.

The Website is provided on an ‘as is’ and ‘as available’ basis without any representation or endorsement made and we make no warranties, whether express or implied, in relation to the Website, or any transaction that may be conducted on or through the Website including, but not limited to, implied warranties of non-infringement, compatibility, security, accuracy, condition or completeness, or any implied warranty arising from course of dealing or usage or trade custom.

You acknowledge that we cannot guarantee and cannot be responsible for the security or privacy of the Website and any information provided by you. You must bear the risk associated with the use of the Internet.

We will use reasonable endeavours to verify the accuracy of any information on the Website but make no representation or warranty of any kind, express or implied, statutory or otherwise, regarding the contents or availability of the Website or that it will be timely or error-free, that defects will be corrected, or that the Website or the server that makes it available are free of viruses or bugs. We will not be responsible or liable to you for any loss of content or material uploaded or transmitted through the Website and we accept no liability of any kind for any loss or damage from action taken in reliance on material or information contained on the Website.

We will use all reasonable endeavours to carry out our obligations within a reasonable period of time but will not be liable to you for any loss, costs or expenses arising directly or indirectly from any delays in doing so and we will not be deemed to be in breach of these Conditions by reason of any delay in performing, or any failure to perform, any of its obligations in relation to these Conditions, if the delay or failure was due to any cause beyond our reasonable control.

All warranties conditions or terms which may be implied by law or custom are expressly excluded from these Conditions or any contract between us to the fullest extent permitted by applicable law. Where the applicable law does not permit an implied warranty to be excluded, then such warranty shall, if permitted by such law, be limited to a period of one year.

We will not be liable, in contract or tort (including, without limitation, negligence), or breach of statutory duty or in respect of pre-contract or other representations (other than fraudulent misrepresentations) or otherwise for any of the following types of loss or damage suffered or incurred by you arising out of or in connection with the use of this Website or the sale or supply by us of goods or services to you:

a) loss of income or revenue

b) loss of  profits (whether direct or indirect)

c) loss of contracts, business or anticipated savings

d) loss of, or harm to, goodwill or reputation

e) any special, consequential or indirect losses  or damages not covered by the preceding paragraphs.

To the extent that our liability to you  is not excluded by the preceding paragraphs, our liability to you, in contract or tort (including, without limitation, negligence), or breach of statutory duty or in respect of pre-contract or other representations (other than fraudulent misrepresentations), or otherwise, for any loss or damage suffered or incurred by you arising out of, or in connection with, the use of this Website, or the sale or supply by us of goods or services to you will be limited to the purchase price of the goods or services to which such loss or damage relates or £1,000,000 (whichever is the greater).

You agree to fully indemnify, defend and hold us, and our officers, directors, employees and suppliers, harmless immediately on demand, from and against all claims, losses, costs and expenses, including reasonable legal fees, arising out of any breach of these Conditions by you, or any other liabilities, arising out of your use of this Website or any other person accessing the Website using your Personal Information with your authority.

This clause does not affect your statutory rights as a consumer, nor does it affect your contract cancellation rights.

12. FORCE MAJEURE

We shall have no liability for delays or failures in delivery or performance resulting from force majeure, including, but not limited to, war, demands or requests of Government authorities, strikes, shortages of labour, fuel, power, raw materials, late or defective performance or non-performance by suppliers, transportation disruptions, inability to ship or other causes beyond our reasonable control.

13. REGISTRATION

You warrant that:

13.1. the personal information which you are required to provide when you register is true, accurate, current and complete in all respects

13.2. you are not impersonating any other person or entity 

13.3. you will notify us immediately of any changes to your personal information by emailing or telephoning our customer service representatives

14. PRIVACY POLICY

In order to monitor and improve customer service, we sometimes record telephone calls.

You can find full details of our Privacy Policy on the Website.

15. THIRD PARTY RIGHTS

Except for our affiliates, directors, employees or representatives, a person who is not a party to these Conditions has no right under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of this agreement but this does not affect any right or remedy of a third party that exists or is available apart from that Act.

16. EXTERNAL LINKS

To provide increased value to our users, we may provide links to other websites or resources for you to access at your sole discretion. You acknowledge and agree that, as you have chosen to enter the linked website we are not responsible for the availability of such external sites or resources, and do not review or endorse and are not responsible or liable, directly or indirectly, for:

16.1. the privacy practices of such websites;

16.2. the content of such websites, including (without limitation) any advertising, content, products, goods or other materials or services on or available from such websites or resources; or

16.3. the use which others make of these websites or resources, nor for any damage, loss or offence caused, or alleged to be caused by, or in connection with, the use of, or reliance on, any such advertising, content, products, goods or other materials or services available on such external websites or resources.

17.OVERSEAS ORDERS

We can ship to customers outside of the United Kingdom subject to extra shipping or postage costs, as well as any additional taxes or expenses incurred due to complying with foreign regulatory requirements or laws. We will notify you of these extra costs and you will have an opportunity to cancel your order in case these costs are not satisfactory.

18.GOVERNING LAW AND JURISDICTION

The Website is controlled and operated in the United Kingdom.

The Conditions will be governed by the laws of England and Wales and you irrevocably agree to submit to the exclusive jurisdiction of the courts of England and Wales.

Mitnahme der aufblasbaren Deckvest Rettungswesten im Flugzeug

  

Lieber Deckvest Kunde,

 

Vielen Dank, das Sie sich für den Kauf einer Spinlock Deckvest entschieden haben. Für den reibungslosen Transport der aufblasbaren Rettungsweste im Flugzeug, haben wir für Sie nachfolgend den neusten Stand der internationalen Verordnungen zusammengefasst.

 

Prinzipiell gilt seit dem 01.01.2019, dass Sie eine aufblasbare Rettungsweste mit Ersatzpatronen mit ins Flugzeug nehmen dürfen.

 

Die internationale Zivilflugfahrtorganisation (engl. Abkürzung ICAO) hat in einer seit dem 01.01.2019 gültigen Verordnung die gesetzlichen Höchstmengen zum Mitführen von CO2 Patronen von Rettungswesten im Flugzeug neu geregelt. Die 50ml Volumen Beschränkung (entspricht 23g) gilt ab dem 01.01.2019 nicht mehr für aufblasbare Rettungswesten. Fortan darf jeder Passagier nach Anmeldung bei dem Luftfahrtunternehmen, gemäß der internationalen Verordnung ICAO T.I. 2017-2018 Tabelle 8-1 Artikel 18, je eine Rettungsweste mit maximal zwei CO2 Patronen und nicht mehr als zwei Ersatzpatronen im Gepäck mitführen.

 

Für „Kleine Druckbehälter/-zylinder, welche in einer selbstaufblasenden persönlichen Sicherheitsausrüstung eingebaut sind wie z. B. einer Rettungsweste“ gelten nach der internationalen Verordnung ICAO T.I. 2017-2018 Tabelle 8-1 Artikel 18 folgende Regelung:

 

  • Nicht mehr als eine persönliche Sicherheitsausrüstung pro Person
  • die persönliche Sicherheitsausrüstung muss so verpackt sein, dass eine unbeabsichtigte Auslösung unmöglich ist
  • begrenzt auf Kohlendioxid oder ein anderes geeignetes Gas der Unterklasse 2.2 ohne Nebengefahr
  • zum Zweck des Aufblasens
  • die Ausrüstung darf nicht mit mehr als zwei kleinen Druckbehältern/-zylindern ausgerüstet sein
  • nicht mehr als zwei kleine Ersatzdruckbehälter/-zylinder dürfen mitgeführt werden.

Die Rettungsweste ist als Mitnahme

  • Erlaubt im oder als aufgegebenes Gepäck
  • Erlaubt im oder als Handgepäck
  • Erlaubt, wenn am eigenen Körper mitgeführt
  • Die Genehmigung des Luftfahrtunternehmens ist erforderlich
  • Der verantwortliche Luftfahrzeugführer muss nicht informiert werden

 

Die IATA (International Air Transportation Association) als der internationale Dachverband der Fluggesellschaften,  hat die Verordnung ICAO T.I der internationalen Zivilflugfahrtorganisation ICAO, im Wesentlichen in seinen Gefahrgutbestimmungen Tabelle 2.3.A übernommen. Jedoch ist das Fassungsvermögen der CO2 Patronen für Rettungswesten nicht explizit definiert, sondern lediglich für andere Geräte.  Daher gilt die Definition in der internationalen Verordnung ICAO T.I. 2017-2018 Tabelle 8-1 Artikel 18 als maßgeblich.

 

Sowohl nach der IATA Regelung sowie der ICAO T.I Verordnung ist die Genehmigung des Luftfahrtunternehmens erforderlich. Daher empfehlen wir Ihnen,

  • Die Fluggesellschaft beim Buchen Ihrer Reise zu informieren und darauf hinzuweisen, dass Sie eine Rettungsweste mit ggf. CO2 Ersatzpatrone mitführen.
  • Beim Packen des aufzugebenen Koffers darauf zu achten, die CO2 Ersatzpatronen auf die Rettungsweste zu legen, sodass das Flughafenpersonal im Falle einer Gepäckkontrolle diese direkt der Rettungsweste zuordnen kann.
  • Die Rettungsweste mit dem Gepäck aufzugeben um etwaige Diskussionen mit eventuell schlecht über die aktuellen Änderung informiertem Personal der Sicherheitskontrollen zu vermeiden.
  • Die Spinlock Deckvest in dem im Lieferumfang enthaltenen Transportnetz zu verpacken

Zur Information weisen alle Spinlock Deckvest CO2 Patronen folgende Eigenschaften auf:

 

  1. Gewicht – 20g, 33g oder 60g CO2 Patrone
  2. Berstdruck mindestens 560 Bar
  3. Außendruck auf 250 bar geprüft
  4. Innendruck bis 60 bar bei 20 ° C gefüllt (Füllgrad max. 75%)


Mit freundlichen Grüßen

   

Myles Uren

Deckware Project Manager


http://www.iata.org/whatwedo/cargo/dgr/Pages/dgr-guidance.aspx

You can download the letter below to show to your airline.

Document Size  
Flying with your Deckvest 252 KB Download

Join the Spinlock mailing list for updates, receive exclusive news and innovations and access exclusive offers and competitions.

Don't worry, we won't spam you, we send emails approximately 5 times per year.  Your details are not passed on and you can unsubscribe at any time!


As an innovative company who routinely develop new and exciting products, we enjoy working with the press.

For the latest press releases, new product briefings, images and videos, please contact press@spinlock.co.uk

Spinlock now have four apps available free to download to compliment the Sense range of products.

Rig-Sense App

Using the Rig Sense, record data of critical settings to ensure repeatable race settings over differing conditions. Create templates to build settings from, add images and share and export data for later analysis with your class.

Download the Apple iOS Rig-Sense App in the App Store by searching Spinlock on your Apple device or here.

Download the Rig-Sense App from the play store by searching Spinlock on your device or here.

Load-Sense (W) App

Controls the Wireless Sense unit and displays & records data. Allows tagging of the application detail, Geo location, test conditions, add images and share and export data for later analysis. Download by searching Spinlock on your device or click here.

Download the LW-Sense App from the play store by searching Spinlock on your device or here.

Load-Sense (D) App

Using LD-Sense OLED unit, record data from the logging session, such as the application detail, test conditions, add images and share and export data for later analysis. Download by searching Spinlock on your device or click here.

Download the LD-Sense App from the play store by searching Spinlock on your device or here.

Sail-Sense App

Launching in 2019, the Sail-Sense App will be available to download here.


EPIRB-PLB and AIS devices have decreased in size and price over recent years, making them increasingly popular with sailors, recreational water uses and those working on or close to water.

Spinlock Deckvest 5D lifejackets feature a mesh pocket on the outside cover which can be used to hold a EPIRB-PLB or AIS device. The 2014 model (available from late February 2014) of the Deckvest 5D features attachment points for the new Chest Pack, specifically designed for keeping essentials such as a EPIRB-PLB or AIS close to hand. As well as the Chest Pack, the new Essentials Pack range includes the Belt Pack and Side Pack, which can be attached to the belt of any Deckvest or other manufacturer's lifejackets.

A number of AIS devices are marketed as being able to integrate into a lifejacket, with some automatically activated by the lifejacket inflating.*   The Kannad R10 AIS device has been tested to integrate with a Deckvest lifejacket and Kannad have published a document on their own website detailing fitting of a Kannad R10 AIS device into a Deckvest lifejacket. This document can be downloaded from the link below.

*Please note that the integration of an EPIRB-PLB or AIS device with a Deckvest lifejacket is at the owner's liability. Spinlock accept no responsibility for the performance of any EPIRP-PLB or AIS fitted into a Deckvest lifejacket or for any damage caused to the Deckvest lifejacket as a result of having fitted an EPIRB-PLB or AIS unit to a Deckvest. 

Document Size  
Kannad R10 - Fitting to Deckvest 5D 571 KB Download

EPIRB-PLB and AIS devices have decreased in size and price over recent years, making them increasingly popular with sailors, recreational water uses and those working on or close to water.

Spinlock Deckvest 5D lifejackets feature a mesh pocket on the outside cover which can be used to hold a EPIRB-PLB or AIS device. The 2014 model (available from late February 2014) of the Deckvest 5D features attachment points for the new Chest Pack, specifically designed for keeping essentials such as a EPIRB-PLB or AIS close to hand. As well as the Chest Pack, the new Essentials Pack range includes the Belt Pack and Side Pack, which can be attached to the belt of any Deckvest or other manufacturer's lifejackets.

A number of AIS devices are marketed as being able to integrate into a lifejacket, with some automatically activated by the lifejacket inflating.*   The Kannad R10 AIS device has been tested to integrate with a Deckvest lifejacket and Kannad have published a document on their own website detailing fitting of a Kannad R10 AIS device into a Deckvest lifejacket. This document can be downloaded from the link below.

*Please note that the integration of an EPIRB-PLB or AIS device with a Deckvest lifejacket is at the owner's liability. Spinlock accept no responsibility for the performance of any EPIRP-PLB or AIS fitted into a Deckvest lifejacket or for any damage caused to the Deckvest lifejacket as a result of having fitted an EPIRB-PLB or AIS unit to a Deckvest. 

Document Size  
Kannad R10 - Fitting to Deckvest 5D 571 KB Download

EPIRB-PLB and AIS devices have decreased in size and price over recent years, making them increasingly popular with sailors, recreational water uses and those working on or close to water.

Spinlock Deckvest 5D lifejackets feature a mesh pocket on the outside cover which can be used to hold a EPIRB-PLB or AIS device. The 2014 model (available from late February 2014) of the Deckvest 5D features attachment points for the new Chest Pack, specifically designed for keeping essentials such as a EPIRB-PLB or AIS close to hand. As well as the Chest Pack, the new Essentials Pack range includes the Belt Pack and Side Pack, which can be attached to the belt of any Deckvest or other manufacturer's lifejackets.

A number of AIS devices are marketed as being able to integrate into a lifejacket, with some automatically activated by the lifejacket inflating.*   The Kannad R10 AIS device has been tested to integrate with a Deckvest lifejacket and Kannad have published a document on their own website detailing fitting of a Kannad R10 AIS device into a Deckvest lifejacket. This document can be downloaded from the link below.

*Please note that the integration of an EPIRB-PLB or AIS device with a Deckvest lifejacket is at the owner's liability. Spinlock accept no responsibility for the performance of any EPIRP-PLB or AIS fitted into a Deckvest lifejacket or for any damage caused to the Deckvest lifejacket as a result of having fitted an EPIRB-PLB or AIS unit to a Deckvest. 

Document Size  
Kannad R10 - Fitting to Deckvest 5D 571 KB Download

Katalog anfordern

Bitte wählen Sie die Sprache des gewünschten Katalogs aus. Falls nicht anders genannt, erhalten Sie eine elektronische Ausführung des Kataloges.

Vielen Dank

Hardware FAQs

I have changed my halyard and now my clutches won't hold the new rope

The greater the line diameter, the greater the load holding. If you have reduced the rope diameter then you may need to consider either a rope core insert or sleeved cover to increase diameter in the clutching area. Your rigger will be able to arrange this. When rope is produced some lubricants are used in the manufacture, which can often effect rope holding performance. These lubricants can be washed out of the rope in the clutching area and once removed performance should improve. Check also the clutch or jammer is free of dirt and debris and parts not showing signs of wear.

Can you convert a single unit clutch to a double or triple unit?

It is not possible to convert clutches into different configurations

What lubrication should I use on my clutches?

Spinlock recommend using fresh water to remove dirt and debris from your rope holding products. Remove ropes and flush with as much water as possible. On XAS, XTS and XCS clutches a light grease can be used on the handle bearing to keep a smooth action. ZS Jammers as well as benefiting from plenty of water flushing also require a light grease on the upper and lower bearing surfaces. With all Spinlock rope holding products, routine maintenance will help give consistent rope holding.  

Why do you recommend Silicone sealant as opposed to polyurethane or polysulphide?

Pure silicone is recommended for mounting clutches and Jammers to seal fastener holes against water ingress. Polyurethane and polysulphide as well as being an adhesive can also damage plastic parts they come into contact with.

Will RP25 rope coating improve my rope holding performance?

RP25 rope coating helps improve the interaction of the rope cover and rope core, which will in turn offer better rope holding performance in clutches and jammers.

Can I use 6mm line in a PXR0810?

6mm line can be used in the PXR0810, but like in all rope holding products, best load holding performance is achieved the greater the diameter of the line.

Do newer model clutches use the same drill template as older models?

Most newer model spinlock clutches use the same drill template as older models that they are updating, but customers should always check by downloading the latest drill template from the website. 

What is the difference between a clutch and a jammer?

Clutches allow the line to be released by opening the handle and the handle can be opened under load. Spinlock recommend taking the load safely on a winch, even when using a clutch. With a jammer the load will always end to be taken safely on a winch before the jammer handles can be opened and rope released. 

Hardware FAQs

I have changed my halyard and now my clutches won't hold the new rope

The greater the line diameter, the greater the load holding. If you have reduced the rope diameter then you may need to consider either a rope core insert or sleeved cover to increase diameter in the clutching area. Your rigger will be able to arrange this. When rope is produced some lubricants are used in the manufacture, which can often effect rope holding performance. These lubricants can be washed out of the rope in the clutching area and once removed performance should improve. Check also the clutch or jammer is free of dirt and debris and parts not showing signs of wear.

Can you convert a single unit clutch to a double or triple unit?

It is not possible to convert clutches into different configurations

What lubrication should I use on my clutches?

Spinlock recommend using fresh water to remove dirt and debris from your rope holding products. Remove ropes and flush with as much water as possible. On XAS, XTS and XCS clutches a light grease can be used on the handle bearing to keep a smooth action. ZS Jammers as well as benefiting from plenty of water flushing also require a light grease on the upper and lower bearing surfaces. With all Spinlock rope holding products, routine maintenance will help give consistent rope holding.  

Why do you recommend Silicone sealant as opposed to polyurethane or polysulphide?

Pure silicone is recommended for mounting clutches and Jammers to seal fastener holes against water ingress. Polyurethane and polysulphide as well as being an adhesive can also damage plastic parts they come into contact with.

Will RP25 rope coating improve my rope holding performance?

RP25 rope coating helps improve the interaction of the rope cover and rope core, which will in turn offer better rope holding performance in clutches and jammers.

Can I use 6mm line in a PXR0810?

6mm line can be used in the PXR0810, but like in all rope holding products, best load holding performance is achieved the greater the diameter of the line.

Do newer model clutches use the same drill template as older models?

Most newer model spinlock clutches use the same drill template as older models that they are updating, but customers should always check by downloading the latest drill template from the website. 

What is the difference between a clutch and a jammer?

Clutches allow the line to be released by opening the handle and the handle can be opened under load. Spinlock recommend taking the load safely on a winch, even when using a clutch. With a jammer the load will always end to be taken safely on a winch before the jammer handles can be opened and rope released. 

Spinlock is an independent and innovative company, widely acknowledged as the world expert in ropeholding. Based in Cowes, UK, the 'Home of Yachting', Spinlock has over thirty years experience of designing and manufacturing rope holding equipment for sailing boats, from dinghies up to the largest superyachts.

Spinlock’s cleats, clutches and jammers hold ropes from 2mm to 32mm in diameter and loads up to 12,000kg. The expert skills of our Special Projects Team are valued by America’s Cup, Volvo Ocean Race and other leading racing teams, Open 60’s and superyacht captains for the originality of their custom rope handling solutions.

Spinlock's Deckware Series includes the award winning Deckvest - the world leading lifejacket harness. Where there had been no significant technical or aesthetic change for over thirty years Spinlock developed a completely new and personal lifejacket harness solution that was attractive and comfortable to wear. Active campaigning by Spinlock about the Deckvest and the importance of wearing your own lifejacket harness has helped encourage a much more positive attitude towards sea safety. Power or sail, amateur, professional or commercial, wearing a well-fitting personal lifejacket has now become the norm.

Since 2010 we have been proud to supply special Deckvest versions to the International Certified Instructors of the highly regarded Royal Yachting Association. Other personal protection equipment widely used at top races and regattas are Spinlock Performance Safety Lines, Mast Pro Harness, ZERO Buoyancy Aid and the award winning lightweight lifejacket, the Deckvest LITE.
Spinlock is an independent and innovative company, widely acknowledged as the world expert in ropeholding. Based in Cowes, UK, the 'Home of Yachting', Spinlock has over thirty years experience of designing and manufacturing rope holding equipment for sailing boats, from dinghies up to the largest superyachts.

Spinlock’s cleats, clutches and jammers hold ropes from 2mm to 32mm in diameter and loads up to 12,000kg. The expert skills of our Special Projects Team are valued by America’s Cup, Volvo Ocean Race and other leading racing teams, Open 60’s and superyacht captains for the originality of their custom rope handling solutions.

Spinlock's Deckware Series includes the award winning Deckvest - the world leading lifejacket harness. Where there had been no significant technical or aesthetic change for over thirty years Spinlock developed a completely new and personal lifejacket harness solution that was attractive and comfortable to wear. Active campaigning by Spinlock about the Deckvest and the importance of wearing your own lifejacket harness has helped encourage a much more positive attitude towards sea safety. Power or sail, amateur, professional or commercial, wearing a well-fitting personal lifejacket has now become the norm.

Since 2010 we have been proud to supply special Deckvest versions to the International Certified Instructors of the highly regarded Royal Yachting Association. Other personal protection equipment widely used at top races and regattas are Spinlock Performance Safety Lines, Mast Pro Harness, ZERO Buoyancy Aid and the award winning lightweight lifejacket, the Deckvest LITE.

Argentina
Trimer SA
0054 114 580 0444
trimer@trimer.com.ar
www.trimer.com.ar

Australia
Harken Australia Pty. Ltd
0061 289 788 666
www.spinlock.net.au

Austria
Peter Frisch GmbH
0049 893 65 075
info@frisch.de
www.frisch.de

Belgium
More Marine bv
0031 172 506 820
info@moremarine.nl
www.moremarine.nl

Canada
Western Marine Company
001 604 253 7721
info@transatmarine.com
www.westernmarine.co

China
Sunrise Marineware Ltd
0086 755 866 50 101
www.sunrisemw.com

Croatia
Sailing Point
Jedrilicarski centar d.o.o.
00385 23 250 855
www.sailing-point.hr

Croatia

Nautika Kranjec
www.nautika.hr

+385 1 3095 071 

Cyprus
Nautilus  Naytiliaka LTD
nautiluscy@cytanet.com.cy
003525383832
0035799713310

Denmark
Columbus Marine A/S
0045 461 91 166
columbus@columbus-marine.dk
www.columbus-marine.dk

Finland
Sail Tech J. Herrala Oy
00358 968 24 950
www.sailtech.fi

France
InterDist Sarl.
0033 299 195 454
info@interdist.fr
www.interdist.fr

Germany
Peter Frisch GmbH
0049 893 65 075
info@frisch.de
www.frisch.de

Gibraltar
M. Sheppard & Co. Ltd
00350 200 75 148
www.sheppard.gi

Greece
Tecrep Marine SA
0030 210 452 1647
www.tecrepmarine.gr

Greece

NAUTILUS Ltd
0030 210 9854238  
ytsa@nautilus.gr 
www.nautilus.gr

Holland
More Marine bv
0031 172 506 820
info@moremarine.nl
www.moremarine.nl

Hong Kong
Sky International
00852 282 75 876
www.sky-international.com

Hungary
Yachting Pannonia Kft.
00361 466 6191
www.johajo.hu

Italy
Harken Italy SpA
0039 0313 523 511
www.harken.it

Japan
CosmosMarine Co. Ltd
0081 798 223 780
cosmarin@pure.ne.jp

Marine Service Kojima Co. Ltd
0081 457 903 581
www.mskojima.co.jp

Korea
Corea Marine
0082-70-8631-0111
www.coreamarine.kr

Latvia                                                                                                                                             Regate                                                                                                                                          0037 12 487 3486                                                                                                                         www.regate.lv

Malta
RLR Yachting
00356 213 31 192

New Zealand
Lusty and Bluyndell
0064 9 415 8303 
www.lusty-blundell.co.nz

Norway
Flak AS
0047 380 56 600
flak@flak.no
www.flak.no

Poland
Ma-Je-R Sp. z.o.o.
0048 228 699 360
www.majernafali.pl

Portugal
Sailingfoz Lda.
00351 226 179 936
www.sailingfoz.pt

Slovenia
Sailing Point d.o.o.
00386 5 677 8125
www.sailing-point.si

South Africa
Harken South Africa
0027 215 113 244
www.harken.co.za

Spain
EquipYacht s.l.
0034 932 219 219
www.equipyacht.com

Sweden
Liro Skandinavia AB
Slättegårdsvägen 3
Billdal
SE-427 50 
Sweden

Switzerland
Bucher & Walt SA
0041 327 559 500
info@bucher-walt.ch
www.bucher-walt.ch

Thailand
Sail In Siam Co., Ltd.
Showroom and Service Centre.
Ocean Marina,
KM 157 Sukhumvit Road,
Na-Jomtien, Sattahip 
+66 (0) 818375507
spinlock@sailinsiam.com
www.sailinsiam.com

Turkey
Denpar Makina San. ve Tic. AS
Ozbek Sokak No 1
Kavacik, Beykoz
Istanbul 
+90 216 693 3535
ww.denpar.com

UK
Marathon Leisure
+44(0)2392 637722
www.marathonleisure.co.uk

USA
Spinlock USA
001 0877 465 6251 (toll free)
info@spinlockusa.com
www.spinlockusa.com

West Indies
Island Water World
001 559 544 5310
www.islandwaterworld.com

 



At Spinlock we're committed to reducing our impact on the environment, and have taken these steps:
  • Reducing use of processed materials
  • Printed literature has been reduced and replaced with downloadable versions and extensive information online
  • All magazines and waste paper are recycled
  • Lobbying against junk ad inserts in boating magazines
  • Requested all suppliers and customers not to use fax
We have also reduced our carbon emissions by:
  • Installing a condensing boiler at office site
  • Only having showroom window lighting on during working hours
  • Sourcing all gas and electricity from renewable resources
  • Replacing warm air heating with high efficiency system at manufacturing site
  • Having 100% low energy lighting at both sites
  • Having fewer, higher efficiency IT servers
  • Using fully recyclable retail product packaging
  • Using recycled fibre for transit packaging
  • Switching 98% of correspondence and documentation to email and online

Select a country:

Quality Measurement Apprentice | Cowes Isle of Wight

An exciting opportunity exists for an enthusiastic, flexible, reliable and methodical person to join the friendly Spinlock production team based in Cowes. You will be required to quality check products to a determined standard. Assisting team leaders in the reporting and publishing of quality data.

Please contact Isle of Wight College for more details:

https://www.iwcollege.ac.uk/course-areas/apprenticeships/

If you do not see an opportunity that is suitable for you, but are still interested in joining us, please feel free to send your CV with Covering Letter to careers@spinlock.co.uk


Queens award 3

Apprentice Assembly OperatorCowes Isle of Wight

An exciting opportunity exists for an enthusiastic, flexible, reliable and methodical person to join the friendly Spinlock production team based in Cowes. The role offers an opportunity for an individual looking to start a career in Manufacturing while gaining qualifications. You will be required to build products in large quantities to assembly schedule. Assisting the assembly team in the manufacture of products to meet our sales commitment. You may also prepare components for subcontract work and quality control support.

A full Job Pack is available, please send request to careers@spinlock.co.uk. Posted applications should be sent to Careers, Spinlock Limited, 41 Birmingham Road, Cowes, Isle of Wight PO31 7BH.

Queens award 1

Why work for Spinlock?

There are lots of reasons to work for Spinlock, you’ll meet some great people, progress on your career development and be rewarded for your contribution to our success. We are a small friendly team located in a great place to work.

Our Values

A certain type of person works for Spinlock, one who strives to be the best they can be and help drive innovation, quality and customer service, through team work.

Inspiration – generating new ideas to fulfil market needs by approaching from different angles, to excite and educate our customers, enthuse people and enhance our business. Being at the forefront of technological advance and changing perceptions.

Innovation – focusing on continuous improvement, pushing boundaries and encouraging thinking outside of the box.
Integrity – doing the right thing, not the easy thing; building trust and reinforcing our reputation. 

In Touch – understanding what’s important to our customers, our employees and our Distribution network. Forming and retaining strong links with industry formal bodies, clubs and networks. We are proud to share information with all our employees and hold regular all Company gatherings.

Continual Improvement – we strive to make the place we work the best it can be. We are continually reviewing how the site and systems work for us and make sure they fit the changing demands of the Company and set our standards high. When you walk in to any of our sites we want you to be impressed and all to be proud. 

Training

At Spinlock we enjoy nurturing people and expanding their skills, we allow employees to grow and fulfil their potential. We run a full induction process and support learning through ongoing in-house training and coaching as well as external courses and appraisal process.


News banner 1

Benefits

Remuneration – We regularly check our salaries against other companies to make sure we’re competitive and keeping up with changes in the market. We look to review your basic pay every year, plus we offer extra performance rewards to recognise individual achievements. When we do well financially, we want our people to feel the benefit too. So we have a discretionary bonus scheme on offer that rewards our employees for helping us to reach our goals. We also offer Long Service Awards.

Employee discount – You’ll get a discount on Spinlock purchases for you and your own family and friends.  We also work hard to secure discounts for employees from Island companies. Employees have access online (through our Health Cash Plan) to discounts and savings on over 100 high street names and days out.

Holidays – We offer you 22 days holiday, plus bank holidays (8 days) and a minimum of 2 extra days to cover our Christmas shutdown from 24 December to 2 January. So that’s a minimum of 32 days per year! Obviously, if you work part-time this will be pro-rated.

Pension – Nowadays, we’re all aware of how important it is to save for retirement. At Spinlock, we want to help you along the way. This is why we offer an excellent Defined Contribution pension plan that qualifies under Auto-enrolment regulations, where if you contribute the Government set minimum or more of your pay Spinlock will contribute 4%. Conditions apply with increasing minimum contributions as per Auto-enrolment regulations.

Life Assurance – From day one, you’ll receive life assurance cover to the value twice your annual gross salary. Conditions apply.

Heath & Wellbeing – At Spinlock your wellbeing is a big priority, and we want you to be the best you can be. That’s why we provide all staff with a Health Cash Plan that provides assistance towards covering everyday health care costs and a wellbeing website with top tips and health guides, to keep you fighting fit. Conditions apply (taxable benefit). You will have access to a counselling line. We provide an in-house qualified Mental Health First Aider. We provide a free to access Well Being library. There is flexibility for your working day through Annualised hours or TOIL earned (conditions apply). We run an Employee to Employee Recognition Scheme.

Community – When you join, you’ll have the opportunity to volunteer for one day at a charity of your choice every 12 months paid. Employees are able to nominate a charity, group or project (based locally) for Spinlock and the Spinlock Team to support. 

Location – Spinlock’s Head Office and Production facility is based in Cowes, the home of yachting. Our head office is in an enviable position overlooking the Solent and two minutes from the town. The Production site sits in a quiet area with excellent facilities with easy access to a food store. The Island is renowned for its watersports, beaches, countryside and festivals. There are great reliable regular links to the Mainland and we are 2 hours from London.

Entertainment – At Spinlock we enjoy getting together for social events such as BBQ’s in the Summer. We hold a Christmas Party every December for all employees and their partners and supply food, drinks and entertainment. The team like to take part in social sporting events.

We are team players, sometimes working long days and weekends, so you need to be flexible. We don’t want to let our colleagues down. We count on our employees’ ability to always provide great customer service at a high technical level to every one of our customers; even after 10 hours on your feet at one of the Trade Shows we exhibit at or after an extended shift during our peak periods. Punctuality and meeting deadlines is very important within our close team.

Our brand is built on quality, innovation, outstanding performance and most importantly the people that drive this; our employees. All our employees are our ambassadors

My Deckvest 5D and Deckvest LITE label states 150N buoyancy, yet the packaging states 170N?

The Deckvest 5D and LITE are tested to a standard of 150N - the minimum buoyancy of the category - and we are required to state this on the label. The Deckvest 5D and Deckvest LITE have an actual buoyancy of 170N. 

The Deckvest 5D is also available in 275N buoyancy for certain applications.

Should I buy a 170N or a 275N Deckvest?

170N is the accepted standard for recreational sailing. It is a comfortable, wearable size that is not too intrusive and it provides significant buoyancy when in the water.

The 275N provides significantly more buoyancy so is suitable for situations where additional weight might be carried, i.e. tools, steel toecap boots, etc.  Remember additional buoyancy and size is not always an advantage as it is heavier to wear and harder to use in the water, i.e. if entering a life raft, etc.

The Volvo Ocean Race sailors helped in the design and development of their lifejacket harness for the 2017/18 race and chose to wear 170N. 

What size Deckvest 5D should I buy, 1, 2 or 3?

The Deckvest 5D is available in 3 sizes. See here for size guides.

The size 2 Deckvest will fit the majority of customers – around 85 % of our Deckvest sales are a Size 2.

The Deckvest LITE and LITE+ are available in one size.

The Deckvest CENTO is one size, specifically for junior users aged 8 to 15 years old weighing from 20-50kg. 

What is the difference between a 5D and VITO?

The Deckvest VITO was developed using all the features, technology and development from the Volvo Ocean Race Deckvest, the trialled and tested VITO gives confidence and design innovation to benefit the sailor.

Comfort, Fit and Adjustment immediately stand out as key features. Easy to put on, easy to adjust to size and with a fully tailored fit, VITO feels lightweight and compact. 

The structured shape means the VITO doesn’t get tangled, can be put on quickly and easily, even in the dark. The VITO is fitted with the latest Spinlock Buckle System and a Coarse and Fine size adjustment ensuring a secure and comfortable fit every time it’s worn, even with cold, wet and tired hands. 

The Deckvest 5D is the original Spinlock lifejacket, available in 2 bladder sizes: 170N and 275N with Pro Sensor Elite operation system. The Deckvest VITO has a Hammar operating system and is 170N of buoyancy.

Read our handy lifejacket comparison chart here.

The VITO article here.


What is the difference between Deckvest 5D and LITE?

The Deckvest 5D is a high specification lifejacket with integrated deck harness. It comes fitted as standard with these features.

The Deckvest LITE is an ultra lightweight lifejacket which may be used for a wide variety of applications, from inshore sailing, RIB, powerboat, fishing, kayaking, paddleboarding and more. You may add to the LITE many additional features depending on the application; including Sprayhood, Pylon™ lifejacket light, Lume-On™ bladder illumination lights. You can also convert this product easily to manual only operation if required. 

Does the the Deckvest LITE have a integrated deck harness?

The Deckvest LITE has no integrated deck harness. 

For an offshore lifejacket with harness see the Deckvest 5D. For a deck harness only, see Deck-Pro.

The Deckvest LITE+ is an update to the popular LITE with an added Deck Harness.

Can I wear the Deckvest LITE+ on an Atlantic crossing?

You could technically wear a Deckvest LITE+ on an Atlantic crossing as the Deckvest LITE+ is a 170N lifejacket with integrated harness, however it does not come fitted with any accessories. These accessories would be vital during an Atlantic crossing.

The following accessories are fitted as standard to our offshore lifejacket harness the Deckvest 5D; sprayhood, Pylon approved lifejacket light, Lume-On bladder illumination lights and safety line cutter, as well as a whole host of other features e.g. double crotch strap and visible activation window.

The Deckvest 5D 170N and the Deckvest LITE+ both contain a 170N bladder and are tested to the same standards; CE Approved, ISO 12402-3 Lifejacket (170N) and ISO 12401 Deck Harness.

You can add the accessories to the Deckvest LITE+ but at which point this would cost the same as the 5D. You may also find the 5D more comfortable, we find offshore sailors prefer the rugged fit of the 5D as it has been designed for offshore sailing vs the LITE+ which was designed with inshore sailors in mind, who may occasionally require the added security of a harness.

How do you to fit the thigh straps or order replacements

There are fitting videos on our YouTube channel and replacements can be ordered through your local store or online.

Choosing between the Hammar Hydrostatic or UML Pro Sensor Elite inflation system

Both inflation systems are very effective but are suitable for different situations. In general, the Hammar system is better suited to very wet conditions as it relies on water pressure to activate.

The UML system is easier to service and parts are more readily available around the world. They are also very resistant to wet conditions - check out the “How Water Sensitive is a Deckvest Pro Sensor 170N Lifejacket?" video.

For more inflation system information see Lifejacket Inflation Systems Explained.

Can I convert my UML Pro Sensor Elite inflation system to Hammar Hydrostatic inflation and vice versa?

No. Unfortunately you cannot do this because they are very different units.

See here for more information on Inflation Systems.

When does the CO2 cylinder expire?

CO2 cylinders do not have an expiry date. We recommend if there is any corrosion on the cylinder it is replaced as this may indicate leakage and the corrosion can damage the bladder fabric. CO2 Bottles can also be weighed to check for leakage, the correct net weight is written on the cylinder.  

When does the UML Pro Sensor ELITE inflator expire?

The expiry date is printed on the firing head unit, this date usually allows 3 years from date of purchase

When does the Hammer Hydrostatic Inflator expire?

The hammer inflation unit expires 5 years after manufacturing. The expiry date is printed on the unit. 

Which re-arming kit do I need, and how do I fit it?

The product pages specify the part number of the re-arming kit that you will need for you Deckvest lifejacket. The UML re-arming kit fits both the Deckvest Pro Sensor and Deckvest LITE lifejackets. Instructions for fitting can be found on the product packaging and in the Spinlock videos.

I find my Deckvest is uncomfortable, have I fitted it correctly?

Correctly fitting and adjusting your Deckvest is key to its comfort. The Spinlock range of lifejackets are designed to be incredibly comfortable and lightweight so they can be worn for extended periods of time. 

Ensure both waist and back adjustment have been used (if applicable). Typically, Deckvest lifejacket should sit higher up the body, the front almost in line with the sternum, and the top should shape and fit around the shoulder, not sitting on the neck. Please see the Spinlock videos to ensure you have it correctly fitted.

The size guide will also help you check you have the correct size product.

Servicing: Where, How, When?

The Deckvest is designed to be easily check and maintained by yourself. Follow the videos online for basic and more detailed checks. 

We recommend that you check your Deckvest at least once a season and before any long passages.  If you would rather a professional looked over it then there is a list of approved Deckvest service centres here.

Servicing your Deckvest Lifejacket

It is recommended that you carry out a complete self-inspection annually, checking:

a.  The outer cover fabric: for cuts, tears, abrasion and damage caused by heat, chemicals etc.

b.  The lifejacket bladder: check for leaks by inflating your lifejacket through the oral tube until firm and leave for 24hrs. Any loss of firmness indicates leakage and means it is unsafe. To check the oral valve, fully inflate the lifejacket and hold the tube under water. If bubbles appear, deflate and re-inflate to test.  If a leak persists, do not use your lifejacket until it has been professionally serviced at your nearest service centre.

c.  The components: remove and inspect all components for signs of damage or contamination.  For example, ensure the CO2 cylinder is screwed in tight and the activation head also screwed tight.

We recommend a professional service at a service centre every two years. If you would prefer to use a Spinlock approved service centre these are listed in the Service Centre locator section of our website.

Can the bladder be repaired or replaced?

We do not recommend that a punctured bladder is repaired. However, if your Deckvest has the “button in” attachment on the lifejacket then we can supply a replacement bladder for you to fit. 

I’ve broken my zip, can it be fixed?

The zips on the Deckvest are plastic to ensure they do not corrode. However, they can break if they are snagged or forced. It is possible to replace the slides. Please contact us for spares and instructions.

The elastics on my Mast Pro Harness have worn out.

Non-skid decks and salt water can take a toll on elastics. Replacement leg strap elastics are available here.

Can I fit a new battery to my Pylon Lifejacket light?

Pylon light batteries may expire prematurely if stored in damp areas causing the light to activate unintendedly.  The Pylon light batteries cannot be replaced as it is a watertight unit. Complete units can be purchased here.

Can I clean contaminants from my Deckvest?

Paint, oils and chemicals can quickly damage the bladder of the lifejacket and we advise replacing the cover if it encounters contaminants. Use of harsh cleaning products may cause greater damage to the Deckvest. We recommend the Pro-Tech cover to wear over the Deckvest if frequently working in dirty work environments. More information on our commercial products can be found here.

Can I fly with my Deckvest?

Although it is often raised as an issue at check in, International IATA regulations state that you can fly with two lifejackets and two re-arming kits as long as they are declared at check in. See Flying with your Deckvest for more information and to download our document to show your airline.

When does the Warranty period start and what is covered.

The 5 year (if registered with TLS) warranty period starts from when you purchase the Deckvest. See Warranty for more details.

How many years service can I expect from my lifejacket?

Spinlock offer a 5 year warranty on our leisure inflatable lifejackets. Spinlock do not offer a service of lifejackets over 10 years old and this is common to most service centres. At this age it becomes very difficult to guarantee the durability of all of the fabric and strong parts.  If you feel that your Deckvest Lifejacket has had very little use, then you are able to inspect and self service the lifejacket yourself in order to extend its life, but this is completed at your own risk.

Are the Deckvest 5D, LITE, CENTO approved to SOLAS?

No – SOLAS is a commercial standard for abandonment lifejackets. The Deckvest is tested to the International ISO12402 standard that covers wearable lifejacketsSpinlock have launched a Deckvest SOLAS 275 Twin Chamber lifejacket which is designed for commercial use.

Manufacturing Dates

There are several dates printed on the Deckvest. The date on the inside label shows which quarter of which year the lifejacket was completed. Harnesses are often made in large batches earlier whilst firing caps are added at a later date than this to ensure that they reach the stores with the maximum lifetime on them.

Lifejacket vs Buoyancy Aid

WING & FOIL buoyancy aids (also known as PFDs - Personal Flotation Devices) assist with buoyancy, you must be a competent swimmer as they only aid you in the water. Lifejackets are tested to a standard which requires that the lifejacket turns an unconscious casualty over to allow them to breathe.

Is the Deckvest 5D Lifejacket Harness USCG Approved ?

The Deckvest 5D Lifejacket Harness is approved to the International ISO12402 standard for lifejacket design and manufacturer. The USCG Approval is different and whilst the Deckvest 5D Lifejacket Harness exceeds this standard many of the great features of the Deckvest 5D Lifejacket Harness would need to be removed to meet the USCG Standard.

Spinlock sell many thousands of Deckvest 5D Lifejacket Harness in the USA every year to customers who want to enjoy the design, comfort and features of the lifejacket, a lifejacket approved to the ISO12402 Standard, who then carry old or basic USCG lifejackets to meet local carriage requirements.

Document Size Category  
ATCU 688 KB Instructions Download
ATCU Throttle Control Installation & Use 240 KB Instructions Download
BE06 21.5 KB Instructions Download
BE06 Bulls Eye | Technical Drawing 21.5 KB Drill Guide Download
BE10-2 466 KB Instructions Download
BE10-3 516 KB Instructions Download
BE10/TF 408 KB Instructions Download
BE12 Bulls Eye Drill Guide 464 KB Drill Guide Download
BE12/TF 464 KB Instructions Download
BE16 Bulls Eye Drill Guide 592 KB Drill Guide Download
BE16/TF 592 KB Instructions Download
E-JOINT Drill Guide 234 KB Drill Guide Download
EA & EJ Diabolo Tiller Extension Installation 46.3 KB Instructions Download
EJB600 306 KB Instructions Download
EJB600 Drill Guide 306 KB Drill Guide Download
EJB900 284 KB Instructions Download
EJB900 Drill Guide 284 KB Drill Guide Download
Installation | EA & EJ Tiller Extensions 449 KB Instructions Download
PD-10C 187 KB Instructions Download
PD-12C 184 KB Instructions Download
PD-8C 166 KB Instructions Download
PD/10 Pad Eye 11.7 KB Instructions Download
PD/10C Drill Guide 899 KB Drill Guide Download
PD/12C Drill Guide 899 KB Drill Guide Download
PD/6C 177 KB Instructions Download
PD/6C Drill Guide 451 KB Drill Guide Download
PD/8C Drill Guide 801 KB Drill Guide Download
PXR Cam Cleat Installation Instructions 102 KB Instructions Download
PXR Drill Guides 1.69 MB Drill Guide Download
PXR Remote | Instructions 3.81 MB Instructions Download
Replacing XTS/XCS 47.5 KB Instructions Download
SUA/1 Drill Guide 23.3 KB Drill Guide Download
SUA/2 Drill Guide 24 KB Drill Guide Download
SUA/3 Drill Guide 29.8 KB Drill Guide Download
Swivel Joint Replacement 44.5 KB Instructions Download
T25 Drill Guides 3.75 MB Instructions Download
T25, T38 & T50 Organisers Installation 52.5 KB Instructions Download
T25/3Y | Drill Guide 289 KB Instructions Download
T38 Drill Guides 2.1 MB Instructions Download
T50 Drill Guides 2.12 MB Instructions Download
TC50 Drill Guides 2.1 MB Instructions Download
TC50 Organiser Installation 119 KB Instructions Download
TWF/50M 24.4 KB Drill Guide Download
TWF/63M 39.4 KB Drill Guide Download
XAS Clutch Installation & Use Instruction 248 KB Instructions Download
XAS Drill Guides 1.86 MB Drill Guide Download
XCS Double Drill Guide 22.3 KB Drill Guide Download
XCS/2 22.3 KB Instructions Download
XCS/3 25.5 KB Instructions Download
XCS/HP 172 KB Instructions Download
XCS/HS 172 KB Instructions Download
XTR Bolt Spacing Diagram 10.7 MB Instructions Download
XTR Clutch Instructions 1.56 MB Instructions Download
XTR Drill Guide 332 KB Drill Guide Download
XTR Side Mount Drill Guide 748 KB Drill Guide Download
XTR Side Mount Instructions 2.31 MB Instructions Download
XTR0812 701 KB Instructions Download
XTR0812-H 748 KB Instructions Download
XTS & XCS Clutches - Installation & Use 349 KB Instructions Download
XTS Drill Guides 1.57 MB Instructions Download
XX Servicing instructions 293 KB Instructions Download
XX0812_HP REMOTE 308 KB Instructions Download
XXA and XXB Drill Guide 0812 276 KB Instructions Download
XXA and XXB Instructions 5.61 MB Instructions Download
XXA0812 | Upgrade Moulding Kit 389 KB Instructions Download
XXC0812 314 KB Instructions Download
ZR1014 278 KB Instructions Download
ZR1014 Instructions 1.49 MB Instructions Download
ZR1014 Jammer Drill Guide 278 KB Drill Guide Download
ZS Alloy Jammers Instructions 2.73 MB Instructions Download
ZS Carbon Jammers Instructions 2.73 MB Instructions Download
ZS0810 111 KB Instructions Download
ZS0810 Drill Guide 111 KB Drill Guide Download
ZS1014B 278 KB Instructions Download
ZS1014B Bonding Template 278 KB Drill Guide Download
ZS1014C 71.9 KB Instructions Download
ZS1014C Drill Guide 71.9 KB Drill Guide Download
ZS1214 111 KB Instructions Download
ZS1214 Drill Guide 111 KB Drill Guide Download
ZS1618 104 KB Instructions Download
ZS1618 Drill Guide 104 KB Drill Guide Download
ZS1618B Bonding Template 195 KB Drill Guide Download
ZS1618C 285 KB Instructions Download
ZS1618C Drill Guide 12.3 KB Drill Guide Download
ZS1824C 31.3 KB Instructions Download
ZS1824C Drill Guide 13 KB Drill Guide Download

Filter by product:

Document Size Category  
ATCU 688 KB Instructions Download
ATCU Throttle Control Installation & Use 240 KB Instructions Download
E-JOINT Installation Instructions 47.4 KB Instructions Download
EA & EJ Diabolo Tiller Extension Installation 46.3 KB Instructions Download
EJB600 306 KB Instructions Download
EJB900 284 KB Instructions Download
Installation | EA & EJ Tiller Extensions 449 KB Instructions Download
Jaw assembly 305 KB Instructions Download
PD-10C 187 KB Instructions Download
PD-12C 184 KB Instructions Download
PD-8C 166 KB Instructions Download
PD/10 Pad Eye 11.7 KB Instructions Download
PD/6C 177 KB Instructions Download
PXR Cam Cleat Installation Instructions 102 KB Instructions Download
PXR Remote | Instructions 3.81 MB Instructions Download
RF/H 307 KB Instructions Download
RF/H and RF/MA Sail Feeder Instruction 458 KB Instructions Download
RF/MA 335 KB Instructions Download
Replacing XTS/XCS 47.5 KB Instructions Download
Rig-Sense | App Instructions 585 KB Instructions Download
Rig-Sense | Conversion Chart 294 KB Instructions Download
Rig-Sense | Instructions 872 KB Instructions Download
Rig-Sense | Tuning your Rig 861 KB Instructions Download
Swivel Joint Replacement 44.5 KB Instructions Download
T25 Drill Guides 3.75 MB Instructions Download
T25, T38 & T50 Organisers Installation 52.5 KB Instructions Download
T25/3Y | Drill Guide 289 KB Instructions Download
T38 Drill Guides 2.1 MB Instructions Download
T50 Drill Guides 2.12 MB Instructions Download
TC50 Drill Guides 2.1 MB Instructions Download
TC50 Organiser Installation 119 KB Instructions Download
WL/1 Line Lead 22.8 KB Instructions Download
WL/2 Line Lead 25 KB Instructions Download
X Base Installation 43.8 KB Instructions Download
XA Clutch - Service Parts 49.7 KB Instructions Download
XAS Clutch - Service Parts 59.8 KB Instructions Download
XAS Clutch Installation & Use Instruction 248 KB Instructions Download
XCS/2 22.3 KB Instructions Download
XCS/3 25.5 KB Instructions Download
XCS/HP 172 KB Instructions Download
XCS/HS 172 KB Instructions Download
XT & XC Clutches - Service Parts 123 KB Instructions Download
XTR Bolt Spacing Diagram 10.7 MB Instructions Download
XTR Clutch Instructions 1.56 MB Instructions Download
XTR Side Mount Instructions 2.31 MB Instructions Download
XTR0812 701 KB Instructions Download
XTR0812-H 748 KB Instructions Download
XTS & XCS Clutches - Installation & Use 349 KB Instructions Download
XTS & XCS Clutches - Service Parts 47.5 KB Instructions Download
XTS Drill Guides 1.57 MB Instructions Download
XX Servicing instructions 293 KB Instructions Download
XX0812_HP REMOTE 308 KB Instructions Download
XXA and XXB Drill Guide 0812 276 KB Instructions Download
XXA and XXB Instructions 5.61 MB Instructions Download
XXA0812 | Upgrade Moulding Kit 389 KB Instructions Download
XXC0812 314 KB Instructions Download
ZR1014 278 KB Instructions Download
ZR1014 Instructions 1.49 MB Instructions Download
ZS Alloy Jammers Instructions 2.73 MB Instructions Download
ZS Carbon Jammers Instructions 2.73 MB Instructions Download
ZS Open Jammers Instructions 2.73 MB Instructions Download
ZS0810 111 KB Instructions Download
ZS0810/OPEN 136 KB Instructions Download
ZS1014/OPEN 213 KB Instructions Download
ZS1014B 278 KB Instructions Download
ZS1014C 71.9 KB Instructions Download
ZS1214 111 KB Instructions Download
ZS1418/OPEN 134 KB Instructions Download
ZS1618 104 KB Instructions Download
ZS1618C 285 KB Instructions Download
ZS1824/OPEN 283 KB Instructions Download
ZS1824C 31.3 KB Instructions Download
ZS2632/OPEN 196 KB Instructions Download

Filter by product:

Document Size Category  
AIS MOB1 Ribbon Fitting Instructions 763 KB Instructions Download
AIS MOB1 User Manual 2.52 MB Instructions Download
Deck Pro | Harness Instructions 1.73 MB Instructions Download
Deckvest 5D | Instructions 2.7 MB Instructions Download
Deckvest CENTO | Instructions 1.47 MB Instructions Download
Exploded diagram - DURO SOLAS 2018 778 KB Download
Instructions | Lume-On™ 354 KB Instructions Download
Mast Pro | Instructions 1.37 MB Instructions Download
Pylon Lifejacket Light | Instructions 2.71 MB Instructions Download
Safety Line Instructions 2019 1.13 MB Instructions Download

Filter by product:

SiteMap

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur adipiscing nunc dolor, in tristique libero faucibus non. Nam quis lorem cursus, pretium sapien id, rutrum lectus. Aenean vitae tortor sed justo vestibulum vehicula vitae quis erat. Cras id nisi vitae odio condimentum semper. Ut consequat tincidunt consequat. Aenean pretium, orci eu tempor malesuada, libero velit venenatis nunc, ut pretium odio lacus a mauris. Integer eget arcu elementum, sagittis arcu eget, adipiscing massa. Nam neque felis, porttitor sed accumsan et, sodales sit amet magna. Sed dignissim aliquet tempus. Sed dictum eget diam eu vestibulum.

Sed at interdum metus, at placerat orci. Morbi id facilisis ipsum. Fusce faucibus ac lectus feugiat iaculis.

Tables Are Cool
col 3 is right-aligned $1600
col 2 is centered $12
zebra stripes are neat $1
Centered Header Default Aligned Right Aligned Left Aligned
First row 12.0 Example of a row that spans multiple lines.
Second row 5.0 Here's another one. Note the blank line between rows.
Fruit Price Advantages

Bananas

$1.34

  • built-in wrapper
  • bright color

Oranges

$2.10

  • cures scurvy
  • tasty

Select a country:

Document Size Category  

Filter by product:

Spinlock Deckvest lifejackets use a range of inflation systems.

Watch the video below for detailed information on Spinlock inflation systems.


Deckvest VITO 
DW-RAH/V170
The Deckvest VITO lifejacket harness uses a Hammar Hydrostatic pressure system. 

Deckvest 5D
DW-RAK/E170
DW-RAK/E275

The Deckvest 5D lifejacket harness uses a Pro Sensor (Pre-October 2018) or Pro Sensor Elite (Post October 2018) firing system. 

Deckvest 5D HammarⓇ (product discontinued, re-arming kits still supported.)
DW-RAH/150
DW-RAH/275


Deckvest LITE & LITE+
DW-RAK
The Deckvest LITE lifejacket uses a water activated UML Mk5 paper coil inflation system. 

Deckvest LITE USCG
DW-RAR/33G
The USCG Approved Deckvest LITE (available to purchase in USA only) uses the water activated Halkey Roberts Alpha Auto Inflator.

Deckvest CENTO 
DW-RAK/100
The Deckvest CENTO junior lifejacket harness uses a water activated UML Mk5 paper coil inflation system.

ALTO Belt Pack
DW-CYD16
The ALTO uses a 16g cylinder and manual Halkey Roberts inflation system.

DURO SOLAS
DW-RAK/275
The Deckvest SOLAS 275 twin chamber lifejacket uses two UML Mk5 paper coil inflation systems. The SOLAS 275 is fitted with 2 inflation systems. You may require 2 x 60g cylinders and 2 x firing caps.

DURO +
DW-RAK
The DURO+ lifejacket harness is fitted with the Pro-Sensor/Pro-Sensor Elite

DURO
DW-RAK (MK5i and Pro Sensor Pre-October 2018)
DW-RAK/E170 (Pro Sensor Elite Post-October 2018) 
DW-RAK/275

The DURO lifejacket uses a water activated UML Mk5 paper coil inflation system. UML MK5i is fitted as standard. The Pro-Sensor/Pro-Sensor Elite is available as an upgrade on lifejacket purchase, please check which model you have.


Mk5 operating system

Lifejacket Inflation Systems Explained

UML Mk5 Inflator 

This is a water sensitive activation system that uses a compressed paper capsule which dissolves when wet which then releases a spring to puncture the CO2 cylinder.

The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation. 




Elite 5 x 7 mr


UML Pro Sensor Inflator ELITE

The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator late in 2018. 13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator.

This is a water sensitive activation system that uses a compressed paper capsule which dissolves when wet which then releases a spring to puncture the CO2 cylinder.

The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation.

The Pro Sensor has two indicators that show the status of the CO2 cylinder and firing head.

The UML Pro Sensor is a very reliable system which is easy to check and re-arm. It is also easy to convert to manual firing only. Re-arming kits for this inflation system are stocked by most marine stores.

3 year expiry date on firing head from manufacture. 



Hammar operating system

HammarⓇ Hydrostatic Inflator

The HammarⓇ inflation system is activated by water pressure and will not inflate until the cap is approximately 10cm underwater. 

This system is designed for use in more extreme conditions and extended offshore sailing.

The benefit of the HammarⓇ system is that the jacket cannot accidentally inflate from being wet with rain and sea spray.

The unit has a single indicator to show if armed, and has a 5 year expiry date.

Delayed inflation can be caused if full immersion of the firing head is delayed by buoyant foul weather clothing.




Alto   manual halkey roberts mc edit

Halkey Roberts Mini Inflator ALTO Inflator

The Deckvest ALTO uses the manual only inflator by Halkey Roberts activated via a manual pull handle piercing one 16g cylinder. 

Rearming kits are supplied with 2 x 16g cylinders.








Deckvest lite uscg   halkey roberts with more yellow area

USCG APPROVED

Halkey Roberts Alpha Auto Inflator

The USCG Approved Deckvest LITE uses a water activated Halkey Roberts Alpha Auto Inflator that is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation. 






Pro sensor operating system


Old style UML PRO SENSOR INFLATOR FOR DECKVEST 5D 170N / 275N, DURO+, replaced with the new Pro Sensor Elite® late in 2018.

This is still supported, see upgrades and spares.

For 170N Deckvest 5D DW-RAK: 
https://www.spinlock.co.uk/de/categories/protect/product_groups/dw-rak

For 275N Deckvest 5D DW-RAK/275:  
https://www.spinlock.co.uk/de/categories/protect/product_groups/dw-rak-slash-275

Need a question answered? Contact the Spinlock team

Pro Support

Thanks for your enquiry - a member of the Spinlock team will be in touch shortly

Pro Support

Die salzige Meeresluft und rauhen Bedingungen auf dem Wasser sind für die weichen Materialien herausfordernd. Eine richtige Pflege der Deckvest verlängert daher die Lebensdauer.

Daher reinigen Sie die Deckvest regelmäßig nach Benutzung mit einem angefeuchteten Schwamm oder Tuch und entfernen somit die Rückstände von Salz und Schmutz. Anschließend hängen Sie die Deckvest in einen trockenen Raum zum Trocknen. Detailierte Pflegeanleitungen finden Sie auf der beiliegenden Benienungsanleitung Ihrer Deckvest.

Eine Auswahl an Videos finden Sie auf unserem Spinlock YouTube Kanal.



Spinlock Ltd
41 Birmingham Road
Cowes
Isle of Wight
PO31 7BH

T: +44 (0) 1983 295555


View Larger Map



Spinlock USA
11-A Bowler Lane
Newport
RI
02840
USA

T: +1 (0) 8774 656251


View Larger Map


Live webcam streaming from our office, looking North East across the River Medina entrance at Cowes and out into the Solent




To return an item ordered from the Spinlock website, please contact orders@spinlock.co.uk with your order number. You will then receive a returns number. 

UK: Due to carriage restrictions, please do not use Royal Mail to return your lifejacket to Spinlock. Please use an alternative courier supplier.


Proposition 65 requires businesses to provide warnings to Californians (State of California USA) about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.  These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals.


Spinlock products contain very very small amounts of ingredients that are listed under Proposition 65 and as a result we have placed the following warning on our products 

WARNING : Cancer and Reproductive Harm – www.p65warnings.ca.gov


Aufträge mit einer Lieferadresse außerhalb von Großbritannien werden in 3-5 Tagen versandt.

Alle Aufträge erhalten eine Tracking-Nummer

Falls Sie Fragen zu Ihrer Sendung haben, wenden Sie sich bitte an: orders@spinlock.co.uk

Vollständige Informationen finden Sie unter: Allgemeine Geschäftsbedingungen



INTRODUCTION

The following is a summary of your product warranty. Full details of the warranty, together with

important exclusions and limitations, are contained in the terms and conditions (another copy of which

can be provided upon request) which apply to your purchase.

The following definitions apply to this summary:

“Spinlock” and “Company” means Spinlock Limited a company incorporated and registered in England

with company number 00943480.

“Goods” means the products, articles or things which you have purchased from the Company.

WARRANTY

Spinlock warrants to you (the buyer) that the Goods are to be free of defects in materials and

workmanship for the Warranty Period (as defined below).. In the case of such a defect, the Company will

either repair or replace the Goods concerned but such obligation to repair or replace is the limit of the

Company’s liability under its warranty.

WARRANTY CONDITIONS

i) The Warranty Period will be 5 years from date of purchase in respect of hardware and 2 years from

date of purchase of Deckware provided that in the case of the ‘Deckvest’ product the 2 year period can

be extended to 5 years by you registering the purchase of the ‘Deckvest ‘product on the Company’s

website within 30 days of purchase. These warranty periods are reduced to 1 year from date of purchase

for any Goods used (i) in professional or semi-professional racing applications, (ii) for military purposes or

(iii) outside of leisure sailing.

ii) Determination of the suitability or fitness of the Goods for the purpose contemplated by you in

purchasing the goods remains your sole responsibility and the Company does not give any warranty in

connection with such suitability or fitness.

iii) The Company shall not have liability under the warranty for wear and tear, corrosion or ultra violet

degradation or if the Goods:

a) are used for any application for which they were not designed;

b) are defective as a result of you failing to follow the Company’s oral or written instructions as to the

installation, storage, commissioning and use of the Goods;

c) are incorrectly maintained or not maintained at all;

d) are used in conditions that exceed the performance specification stated by the Company for those

Goods;

e) are damaged as a result of wilful damage, by accident, by negligence by you or a third party or due to

use in abnormal conditions;

f) are altered or modified in any way;

g) are serviced by anyone other than an authorised representative of the Company (unless such service

meets the Company’s stated guidelines and standards for service of the Goods concerned)

iii) Any Goods subject to a warranty claim must be returned to the Company for inspection unless we

notify you to the contrary in writing.

iv) The Company are not liable for any shipping or installation labour charge associated with any warranty

claim.

v) This warranty does not affect your statutory rights as a consumer.

vi) You should note that certain environmental elements such as salt, sand, moisture and chemicals may

considerably accelerate wear of certain of the Goods. In exceptional circumstances, wear or damage

could occur on the first use of the Goods which would reduce the lifetime of the Goods to that single use.

EXCLUSIONS AND LIMITATIONS OF LIABILITY

All warranties conditions or terms which may be implied by law or custom are expressly excluded from

any contract between us to the fullest extent permitted by applicable law. Where the applicable law does

not permit an implied warranty to be excluded, then such warranty shall, if permitted by such law, be

limited to a period of one year.

Spinlock will not be liable, in contract or tort (including, without limitation, negligence), or breach of

statutory duty or in respect of pre-contract or other representations (other than fraudulent

misrepresentations) or otherwise for any of the following types of loss or damage suffered or incurred by

you arising out of or in connection with the use of this Website or the sale or supply by Spinlock of goods

or services to you:

a) loss of income or revenue;

b) loss of profits (whether direct or indirect);

c) loss of contracts, business or anticipated savings;

d) loss of or harm to goodwill or reputation; or

e) any special, consequential or indirect losses or damages not covered by the preceding paragraphs.

To the extent that Spinlock’s liability to you is not excluded by the preceding paragraphs, Spinlock’s

liability to you, in contract or tort (including, without limitation, negligence), or breach of statutory duty

or in respect of pre-contract or other representations (other than fraudulent misrepresentations) or

otherwise for any loss or damage suffered or incurred by you arising out of or in connection with the use

of Spinlock’s Website or the sale or supply by us of goods or services to you will be limited to the

purchase price of the goods or services to which such loss or damage relates or £1,000,000 (whichever is

the greater).

SEVERENCE

If any clause of our terms and conditions (including the warranty) is held by any competent authority to

be invalid or unenforceable in whole or in part, the validity of the other clauses of the other provisions of

the terms and conditions and the remainder of the clause in question shall not be affected (including the

warranty and all relevant exclusion and limitation provisions).

STATUTORY RIGHTS

This warranty gives specific legal rights, in addition to other individual legal rights which may vary

according to country. Spinlock reserve the right to alter the design and specification of any product

without prior notice.

Alegre 01

Clutches and jammers have always been a simple and cost effective rope holding solution when compared to a winch and, more recently, halyard locks.  

Halyard locks, and the benefits in reducing mast compression, are a key component of many competitive boats and are now being more widely used on large performance cruising boats.  A halyard lock is the equivalent of a traditional mainsail tack pin, just at the top of the mast. However, the use of a lock does require you to hold and adjust the full sailing load at deck level, using a clutch or jammer.  With the advent of new sail designs, especially downwind sails, with most requiring extremely high luff loads, clutches and jammers are now being worked harder by another corner of the sail, namely the tack.  Locks are not suited to tack applications because with mast rake changes, different types of sail carried and trimming requirements, infinite adjustment is often required. Using a clutch or jammer, these adjustments can be controlled in the normal way at deck level. 

On a number of recent high performance multihulls (including the AC45's) the downwind sails are permanently attached to the bow furler, because its not practical to go out onto the bowsprit during a race.  In cases like these,  jammers have been used at the mast head to provide a variable locking position and are operated remotely from the deck on a trip line, just like a lock.  This approach is working for a number of larger yachts were it is notoriously difficult to dimensionally control and set a sail between two points over forty metres apart and even harder to get the inboard reefs to fit.

Remote operation of clutches and jammers is now common on board many performance yachts.  The first boats to embrace remote operation were the IMOCA 60's for end of boom reef jammers and tack line jammers mounted on the bow.  More recently the focus on aerodynamic efficiency of deck layouts has forced designers to run sheets and halyards underdeck when possible.  The TP class has led the way with remotely operated under deck spinnaker sheet clutches and pit clutches buried in the coach roof.  Mini Maxi designs are following suit by utilising side mount, bonded, remote operation XXC ceramic and titanium clutches and ZS jammers.  

With the holding capacity of clutches almost doubling over the past 5 years, many applications can now be held with the convenience of a handle operated unit rather than a winch release jammer. This has been particularly helpful for use on tack lines for spinnaker drops were the tack release is critical for a fast and safe drop, whether by hand or winch driven.  Larger and offshore yachts carefully consider the properties of the load holding equipment they require and often reduce the load holding required with a purchase, therefore allowing a particular clutch or jammer to be used.  The very latest Volvo Ocean Race 65 has been careful planned between sailors, running rigging experts and the designer, resulting in cost effective and 100% race proven solutions which work for both inshore and offshore with the removal of a single purchase. 

The Spinlock high load product range, especially rope holding equipment, has developed rapidly in the last few years providing lighter, stronger and more adaptable products, without the need of expensive customisation, all with ever increasing load holding capacity.  

Contact Spinlock directly to discuss any projects you have in mind where we maybe able to provide a competitive edge, make your life on board easier or simply more organised.

Deckvest Größentabelle

Für die Sicherheit und Ihren Komfort ist die Auswahl der richtigen Größe essentiell. Für die Auswahl der passenden Größe benutzen Sie bitte die Größentabelle.



Size guide   deckvest 5d   612 x 554 pxSize guide   lite lite plus   612 x 554 pxSize guide   cento   612 x 554 pxWing foil size guide 2016Kneepads size guide 2016Size guide   lite uscg   612 x 554 pxSize guide   solas   612 x 554 pxDeckvest duro size guide 2016
Spinlock offer next day shipping when ordered by 1pm local time. However due to demand web orders are currently shipping 48hrs after orders placed before 1pm local. 
Orders shipping to UK address are sent on a next day delivery service. 
Orders shipping to addresses outside the UK are sent on 3-5 working day service.
All orders will receive a tracking number.
If you have any questions related to your delivery please contact orders@spinlock.co.uk.
For full details please read our Terms & Conditions.